sounds like your BIOS boot into a MBR which is not what your knoppix installed MBR.
The easiest(if supported) is to change the boot sequence in BIOS.
This message is not coming from GRUB/LILO but more like a standard DOS/NT boot sector.
Am trying to consolidate my setup downstairs, and to move the family from LinSpire to straight Debian via Knoppix.
As part of the consolidation I've moved my external firewire drives onto the downstairs machine (Knoppix supports Software RAID, right?), and then added a second HD to the same IDE cable that my boot disk is on.
Here is where things get wierd. I have made sure the boot disk is setup as Master (correct jumper) and the other disk as Slave (correct jumper). I "think" I've got the cable right with the end connector on the Master, and the middle connector on the Slave.
I can boot off the CD just fine, and see both drives, and read from both ok. I can do the install to the boot drive just fine. But when I reboot I get "Operating System Not Found". However, if I open up the box and disconnect the Slave drive, then Knoppix boots just fine from the boot drive. So obviously the install wrote to the Master drive just fine, but something about the Slave drive stops it from booting properly on the reboot.
Any ideas what I could be doing wrong? I'd like to still have both drives, but opening and closing the box is getting tedious, and once my RAID is setup the other space won't be all that necessary...
Thanks in advance,
Ewan
sounds like your BIOS boot into a MBR which is not what your knoppix installed MBR.
The easiest(if supported) is to change the boot sequence in BIOS.
This message is not coming from GRUB/LILO but more like a standard DOS/NT boot sector.
Well, that didn't seem to work, however setting things up a little differently and using a different hard drive did. I probably should have kept track of which things I did in which order since I suspect that having fixed this contributed to the other hard drive working...
In any event, thanks for the help!
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB
$3299.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M620 Blade Server
$39.99
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
HP BL460c 2SFF GEN9 Blade Server 2x 12 Core Xeon E5-2670 v3 256GB RAM 600GB HDD
$199.99
Dell PowerEdge M620 Blade Server 2x E5-2670 2.6Ghz 16-Cores 256gb 2x 146gb 15k
$244.99
UCSB-B200-M4 UCS Blade Server, 2x E5-2667 V3, 256GB RAM DDR4, 2x 300GB Drives
$299.99