sounds like your BIOS boot into a MBR which is not what your knoppix installed MBR.
The easiest(if supported) is to change the boot sequence in BIOS.
This message is not coming from GRUB/LILO but more like a standard DOS/NT boot sector.
Am trying to consolidate my setup downstairs, and to move the family from LinSpire to straight Debian via Knoppix.
As part of the consolidation I've moved my external firewire drives onto the downstairs machine (Knoppix supports Software RAID, right?), and then added a second HD to the same IDE cable that my boot disk is on.
Here is where things get wierd. I have made sure the boot disk is setup as Master (correct jumper) and the other disk as Slave (correct jumper). I "think" I've got the cable right with the end connector on the Master, and the middle connector on the Slave.
I can boot off the CD just fine, and see both drives, and read from both ok. I can do the install to the boot drive just fine. But when I reboot I get "Operating System Not Found". However, if I open up the box and disconnect the Slave drive, then Knoppix boots just fine from the boot drive. So obviously the install wrote to the Master drive just fine, but something about the Slave drive stops it from booting properly on the reboot.
Any ideas what I could be doing wrong? I'd like to still have both drives, but opening and closing the box is getting tedious, and once my RAID is setup the other space won't be all that necessary...
Thanks in advance,
Ewan
sounds like your BIOS boot into a MBR which is not what your knoppix installed MBR.
The easiest(if supported) is to change the boot sequence in BIOS.
This message is not coming from GRUB/LILO but more like a standard DOS/NT boot sector.
Well, that didn't seem to work, however setting things up a little differently and using a different hard drive did. I probably should have kept track of which things I did in which order since I suspect that having fixed this contributed to the other hard drive working...
In any event, thanks for the help!
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
HP/HPE ProLiant AMD Opteron X3216 APU 16 GB RAM MicroServer Gen 10 NO DRIVES
$299.99
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
HP ProLiant Xeon E3-1220L V2 2.30 GHz 16 GB RAM MicroServer Gen8 NO DRIVES
$199.99
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00