sda and sdb are SATA disks using the Promise SATA controller (RAID is off) on the MB. These are detected on boot; all is well. sdc and sdd are SCSI using Adaptec 29160N controller. They are not detected on boot, although the correct dirver module, aic7xxx is loaded. (This is with the 2.6 kernel, of course.) parted does not see the disks. FWIW, sdc1 is VFAT, sdd1 is Ext3.
Suggestions?
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$74.99
Seagate Exos X16 ST14000NM001G 14TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$157.99
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$174.99
WD 2TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0020BBK-WESN
$49.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
2 PACK Seagate ST1000LM035 Mobile HDD 1TB 2.5" SATA III Laptop Hard Drive
$27.25
TOSHIBA MD04ABA400V 4TB 128MB Cache SATA 6. 0Gb/s 3. 5"
$18.00
Seagate Barracuda ST3000DM001 3TB 7200 RPM 64MB 6.0Gbs SATA 3.5" Internal HDD
$25.89
HDD 3.5" SATA Hard Drive with Windows 7/Win 10 Installed Legacy
$35.99