-
Knoppix troubles - help!
I am trying to use Knoppix on my mother's computer, but no matter what I try, it always locks up during boot. She has an old eMachines computer with a Cyrix MII 266 MMX processor, 192 MB RAM, a 2.1 GB Hd (never used by Knoppix, of course), and an ATI 3D Rage IIc video card.
If I allow Knoppix to boot without any special instructions, it always locks after detecting the processor. If I specify "knoppix no usb apm scsi" or any combination of those, it locks after detecting APM features, which it detects immediately after detecting the processor. And if I use "failsafe", it boots normally until it tries to start X, at which time the screen goes blank, and sometimes the CD-ROM drive keeps reading from the CD for an indefinite amount of time. Never does the X GUI start.
I cannot use "knoppix 2" because it locks after detecting the processor. I have tried using "failsafe knoppix 2" and "failsafe 2", but it does not seem to understand my intent.
Is there some way to boot to text mode only and have failsafe mode? And does anyone have any ideas on how I might start X? I have used this very same CD successfully on the computer I used to download and burn it. It had the thing booted to a full KDE desktop faster than Windows XP Home can boot. Everything worked. Both I and my friend were very impressed; he even asked for a copy.
Can anyone help me with the problems I am having on my mother's computer? Any suggestions as to what I can do to get it working? Thanks in advance!
P.S. - Downloading a new version of Knoppix is not easy for me. I have only a modem, and in order to even be able to download it, I need to use broadband because it changes so often. So I have to "borrow" bandwidth from this friend of mine, and that's not something I can do very often.
-
Senior Member
registered user
<snip>
I am trying to use Knoppix on my mother's computer, but no matter what I try, it always locks up during boot... Is there some way to boot to text mode only and have failsafe mode?
</snip>
If you want to get to a text-screen-only mode, try "runlevel 0" (zero) on boot-up. I have not tried this (though I will soon), but it IS specified in the initial DOCs. It also says that you can "stack" commands. It's a place to start...
-
Welll...
In my post, I mentioned trying "failsafe knoppix 2" and "failsafe 2", which was my attempt to reach the text-only mode and stack commands.
I never used runlevel 2, before... I have used runlevel 1 (single user mode), runlevel 3 (text only networked mode) and runlevel 5 (graphical networked mode). IIRC, runlevel 0 (zero) is system halt, and runlevel 6 is reboot. Again, IIRC, only runlevel 4 is unused, so runlevel 2 must be text only non-networked mode.
I do appreciate your suggestions, though. I will have to look through the docs again and see if there isn't anything I missed.
-
Senior Member
registered user
Re: Welll...
> I am trying to use Knoppix on my mother's computer, but no matter what I try, it always locks up during boot. She has an old eMachines computer with a Cyrix MII 266 MMX processor...
--That's the problem, right there. Emachines are notorious pieces of crap - they're the "Packard Bell" for the new millennium. Your best bet is to go to a computer show in your area and buy a used computer on the cheap - but ask if (make sure!) you can boot Knoppix on it before you buy!
--You might be able to do a workaround in the meantime, but I doubt it.
Originally Posted by
catlord17
In my post, I mentioned trying "failsafe knoppix 2" and "failsafe 2", which was my attempt to reach the text-only mode and stack commands.
I never used runlevel 2, before... I have used runlevel 1 (single user mode), runlevel 3 (text only networked mode) and runlevel 5 (graphical networked mode). IIRC, runlevel 0 (zero) is system halt, and runlevel 6 is reboot. Again, IIRC, only runlevel 4 is unused, so runlevel 2 must be text only non-networked mode.
I do appreciate your suggestions, though. I will have to look through the docs again and see if there isn't anything I missed.
-
Re: Welll...
Originally Posted by
Dave_Bechtel
>
--That's the problem, right there. Emachines are notorious pieces of crap - they're the "Packard Bell" for the new millennium.
I know. eMachines was cheap. I told her not to buy cheap. She bought cheap. What does she care? I'm the one who's had to do over $1,000 worth of work on it (if I was charging her my usual fee for my time) to keep the damned thing running under Winblows. (Of course I'm not charging her, since she's dear old mom.)
But I know about eMachines.
Thanks for the closure though.
-
Re: Welll...
--That's the problem, right there. Emachines are notorious pieces of crap - they're the "Packard Bell" for the new millennium. Your best bet is to go to a computer show in your area and buy a used computer on the cheap - but ask if (make sure!) you can boot Knoppix on it before you buy!
Not the case for newer emachines computers. They user better parts and knoppix runs like a dream on my AMD eMachines computer. The damn thing was inexpensive, but it isn't cheap.
--You might be able to do a workaround in the meantime, but I doubt it.
My guess is that he is having usb issues. Try typing knoppix nousb at the boot prompt. That should fix the problem.
-
I've got a Pentium MMX 200 MHz, 64 MB, Rage IIc. If I start Knoppix, there's only a blank screen immediatly after the start picture. If I start it in failsafe mode, a kernel panic occurs. Might this be the same problem? Could the Rage IIc be the problem?
-
Senior Member
registered user
Re: Welll...
Originally Posted by
cascadefx
--That's the problem, right there. Emachines are notorious pieces of crap - they're the "Packard Bell" for the new millennium. Your best bet is to go to a computer show in your area and buy a used computer on the cheap - but ask if (make sure!) you can boot Knoppix on it before you buy!
Not the case for newer emachines computers. They user better parts and knoppix runs like a dream on my AMD eMachines computer. The damn thing was inexpensive, but it isn't cheap.
--You might be able to do a workaround in the meantime, but I doubt it.
My guess is that he is having usb issues. Try typing
knoppix nousb at the boot prompt. That should fix the problem.
Yea, emachines was bought by gateway and is now useing better parts.
You said it locked up after detecting apm? Try
knoppix noapm
at boot.
Similar Threads
-
By Pelvis Resley in forum General Support
Replies: 0
Last Post: 08-09-2004, 06:42 AM
-
By The_Martian in forum Hardware & Booting
Replies: 3
Last Post: 07-17-2004, 12:42 AM
-
By cameik in forum Hdd Install / Debian / Apt
Replies: 8
Last Post: 06-01-2004, 01:35 AM
-
By malic in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 06-04-2003, 09:05 AM
-
By knopperj in forum General Support
Replies: 0
Last Post: 02-05-2003, 10:27 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
IBM System x3250 M4 Server Intel Xeon E3-1220 V2/3.10Ghz RAM 16GB HDD 1TB
$79.00
IBM System x3250 M4 Server Intel Xeon E31220/3.10Ghz RAM 16GB HDD 1TB
$79.00
IBM System x3250 M4 Server Intel Xeon E31220/3.10Ghz RAM 16GB HDD 2TB
$79.00
IBM System X3250 M3 Server 8GB RAM Intel Xeon x3440 2.53ghz (NO HDD)
$41.99
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6Core 64GB RAM No HDD Server System
$314.99
IBM Server Rack Cabinet Machine Type 9308 Model 42P w/ Mounting Accessories
$379.99
IBM System x3550 M3 Dual Intel Xeon X5650 @2.67GHz 32GB RAM No HDD
$68.50
IBM EServer Xseries 220 Desktop Computer Intel Pentium 3 1GHz 512MB Ram No HDD
$224.99
IBM x3650 M4 2x Xeon E5-2670 2.6ghz 16-Core / 64GB / M5110e / 2x PSU
$229.99
1U IBM x3550 M5 4 Bay SFF SAS3 Server 2x E5-2683 V3 28 Core 128GB DDR4 2x Tray
$318.00