-
Junior Member
registered user
Here's my XF86Config-4 as it is now:
Code:
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" LeftOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
EndSection
Section "Monitor"
#DisplaySize 320 240 # mm
Identifier "Monitor0"
VendorName "VSC"
ModelName "A70"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
Option "DPMS" "true"
VendorName "IBM"
ModelName "IBM08bb"
HorizSync 30 - 54 # DDC-probed
VertRefresh 50 - 120 # DDC-probed
# These are the DDC-probed settings reported by your monitor.
# 1280x1024, 75.0Hz; hfreq=79.98, vfreq=75.03
ModeLine "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03
ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 800x600, 85.0Hz; hfreq=53.67, vfreq=85.06
ModeLine "800x600" 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync
# 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32
ModeLine "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
# 640x480, 85.0Hz; hfreq=43.27, vfreq=85.01
ModeLine "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
# 640x480, 75.0Hz; hfreq=37.50, vfreq=75.00
ModeLine "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94
ModeLine "640x480" 25.17 640 648 744 784 480 482 484 509 -hsync -vsync
EndSection
Section "Device"
### Available Driver options are:-
### Values: [i]: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "ForcePCIMode" # [<bool>]
#Option "CCEPIOMode" # [<bool>]
#Option "CCENoSecurity" # [<bool>]
#Option "CCEusecTimeout" # [i]
#Option "AGPMode" # [i]
#Option "AGPSize" # [i]
#Option "RingSize" # [i]
#Option "BufferSize" # [i]
#Option "Display" # <str>
#Option "PanelWidth" # [i]
#Option "PanelHeight" # [i]
#Option "ProgramFPRegs" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "VideoKey" # [i]
#Option "ShowCache" # [<bool>]
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Rage 128 PD/PRO TMDS"
BusID "PCI:1:11:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: [i]: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # [i]
#Option "CacheLines" # [i]
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # [i]
Identifier "Card1"
Driver "i810"
VendorName "Intel Corp."
BoardName "82810E DC-133 CGC [Chipset Graphics Controller]"
BusID "PCI:0:1:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
I don't have any resolutions configured for Screen0, but Screen1 is the one giving me trouble. I used the device configurations reported to me by the Knoppix CD for Card0, Card1, Monitor1, and Screen1, and the X -configure settings for Monitor0 and Screen0 (and everything else). I also double-checked, and my Screen1 is running at 800x600, not 640x480 as I previously thought. I just looks really low because the other screen is running at 1280x1024. Whoops... scratch that. The other screen is running at 1400x1050 (yikes).
By the way, sometimes I screw up the XF86Config-4 file and get two blank screens when I restart X. Is there a keyboard shortcut I can use to get into text/command-line mode from there?
-
Senior Member
registered user
I wasted a day getting this going with even minimal success on KNX 4.0.2 till I tried using Rinks suggestion to generate a XF86Config-4 replacement file with all my hardware installed. I figured it could NOT be that easy. Apparently it is.
Using "init 3" from a root shell to exit KDE, I ran the "X -configure" command (as root) and copied the resulting XF86Config.new file to /etc/X11 as XF86Config-4. I restarted KDE using the "init 5" command. Thinks were functional as both montiors worked, but FAR less than perfect (goofy resolution, mismatched color depth, screens went black and white when running xawtv, etc.).
So I used XF86Config-4 files saved from separate live CD boots as a reference on what was needed; first I installed just the card and monitor i was using for monitor0. After saving the XF86Config-4 file for monitor0, I removed that card and monitor, and performed the same steps using the hardware for monitor1.
Using the information from the two additional files, I modified the file created using "X -configure". Happy to report that things work spectacularly now.
I may have to get an additional card now so that I can span three monitors...
This post was invaluable in getting this going. Thanks all...
Similar Threads
-
By rakeron in forum General Support
Replies: 1
Last Post: 02-27-2005, 04:59 PM
-
By phrostie in forum Hardware & Booting
Replies: 0
Last Post: 08-21-2004, 02:27 AM
-
By nicorelli in forum Hardware & Booting
Replies: 0
Last Post: 08-05-2004, 09:12 AM
-
By nicorelli in forum General Support
Replies: 0
Last Post: 07-01-2004, 12:09 AM
-
By gyro in forum Hardware & Booting
Replies: 1
Last Post: 01-10-2004, 10:31 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Atari 1200XL Computer with Power Supply and BASIC - Tested 100% Working
$325.00
Atari 1050 5.25" Floppy Disk Drive w/ CO17945 Power Adaptor - Powers On
$49.99
Atari SIO2SD (Lotharek v1.3) Disk Drive Emulator - Atari 400/800/XL/XE Computers
$59.95
Atari 400/800/XL/XE Computer SIO2PC - PC/Mac Disk Drive Emulator Adapter/Device
$15.25
atari B &C 810 Happy floppy disk drive
$150.00
Atari 800XL Retro Computer Vintage Computing Gaming - Untested - No Power Supply
$109.00
Atari 1090XL Reproduction Main Board with two cards.
$249.42
Atari 800xl E X C E L L E N T condition. Atarimax 8Mbit with Games
$250.00
A8picoCart Atari 130 / 65 XE 800 / 1200 XL XEGS multicart UnoCart clone game
$32.95
Vintage Atari 800XL Home Computer - Rare
$150.00