-
Junior Member
registered user
I have tried the above solution without success:
After booting from Knoppix 3.7 Live-CD I went mit cntrl-ALt-F1 to the console.
The command "knoppix tohd...." is not known to the bash shell (mybe it was only a path issue?)
I tried to issue "knoppix tohd=/dev/sda1" (I have an USB disk which was found and auto mounted by Knoppix) on the boot prompt.
This failed (probably because sda1 is not ready to be used at this early time in the boot process).
By the way, what is the difference to "knx-hdinstall" (does this prepare for a full boot from HD vs. a boot from CD taking most of the files from HD??)
Can I use this command as well to get all the system copied to HD and then have both options: boot from HD or from CD+HD?
[edit] I tested "knx-hdinstall" - command not found as well. I found "knx2hd" and "knoppix-installer" instead. I am a bit confused now! Any help to guide me out of this confusion?
Thx for clarification!
-
hey,
thank for all the replys,
and since I see that other people have the same problem I explane what I did.
to tschloss: try the next command for hd install: 'sudo knoppix-installer'
(I didn't try it, it's from earlier reply, and I think it's from a regular shell)
I personaly didn't try the 'tohd...' and 'fromhd...' and it looks like it going to make some problems with ntfs files.
I tried and used 'bootfrom...' and it works. BUT, it didn't work from the external hd because it wasn't mounted or someting like that at the time it was needed for booting (so I'm guessing it won't work with 'tohd...' and 'fromhd...' ).
and when I used the c: hd for 'knoppix.iso' (bootfrom=/dev/hda1) it works fine but it mounted ALL the hd as 'cdrom2.loop' and I couldnt get to this hd, not even for reading.
so, if you need access to the hd that you put the 'knoppix.iso' image on, you need other solution.
if someone knows someting else, please let as all know .
thanks, shimi
Similar Threads
-
By susanjohnson in forum Hdd Install / Debian / Apt
Replies: 4
Last Post: 04-21-2005, 11:36 AM
-
By nmz787 in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 11-21-2004, 09:17 AM
-
By Jez in forum General Support
Replies: 4
Last Post: 08-09-2004, 09:06 PM
-
By nishtya in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 04-18-2004, 10:08 PM
-
By Superstoned in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 08-27-2003, 03:04 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
IBM QRadar xx29 Server 4412Q2A
$170.00
IBM 8203 E4A p520 Server 8203-E4A 4.2GHz 2-Core POWER6 32GB RAM / NO HDD USED
$99.99
ibm server z series
$16000.00
IBM Power 720 POWER7 00E6516 3.6GHz CPU 64GB RAM Server
$209.98
IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD
$399.99
IBM Power 740 8205-E6C Express 8-SFF Power7 3.55GHz CPU 64GB RAM *No HDD* Server
$191.99
IBM 7944AC1 System x3550 M3 Server 1*Intel Xeon X5650 2.67GHz 4GB SEE NOTES
$26.97
IBM System x3250 M4 Server Intel Xeon E3-1220 3.10GHz 8GB RAM No HDDs
$58.52
IBM Power S822 8284-22A 2.5" 12-Bay 64GB 2X 00ND478 2X 00E2865 *READ*
$599.99
1U IBM x3550 M5 4 Bay SFF SAS3 Server 2x E5-2683 V3 28 Core 128GB DDR4 2x Tray
$318.00