-
Senior Member
registered user
"Device Is Busy" when unmounting devices ARRRGH
OK, I finally got my old zip drive working and recognized.
And I even got my Fuji FinePix 2300 camera to be recognized as a simple USB storage device. I can download my pics and everything. (That was a revelation!!!)
BUT! How do I unmount and or "refresh" these devices when I want to
1. eject, and put in a new zip disk
OR
2. change memory cards in the camera so that it sees a fresh one? I mean, I will typically use more than one memory card on a trip or photo shoot
When I do: umount /mnt/zip OR umount /dev/sdb4
I get "device is busy". And I can't even manually eject the disk by pressing the eject button.
THE CAMERA:
If I do: umount /mnt/camera
I again get "device is busy".
This prevents me from changing out memory cards.
What's the trick here? How do unmount these things?
sakiZ
-
Senior Member
registered user
I find that sometimes opening a file in konqueror helps.
If nothing else works try a lazy -l unmount. The shows it as not being mounted, but programs useing it can still access it and it could cause corruption. Just wait a little bit, then try to remove.
-
![Quote](images/misc/quote_icon.png)
Originally Posted by
firebyrd10
I find that sometimes opening a file in konqueror helps.
Konqueror leaves some open handles (do a top after using konqueror on a mounted directory) that prevents umounting devices. I usually use:
Code:
umount -f /<rebel directory>
to force the unmount. You have to make sure that there is no other software is using the device. Such distraction can corrupt the filesystem on the device you are trying to unmount. For example, saving configuration files when you shutdown Knoppix.
--GN
-
Senior Member
registered user
Thanks!
Umount -f !!!
I'm going to have to buy that Hack Knoppix book. I assume this kind of info is in it.
sakiZ
-
Senior Member
registered user
![Quote](images/misc/quote_icon.png)
Originally Posted by
gnarvaja
Code:
umount -f /<rebel directory>
to force the unmount. --GN
I've found that even that doesn't work sometimes, it just won't unmounmt.
What is doing a top?
-
Senior Member
registered user
top is a prosess/mem... monitoring tool. it displays what program uses how much memory and cpu, what pid it has (process id, the one you use too kill things)...
-
Senior Member
registered user
Once you have finished downloading or copying your photo files you need to change back out of the /mnt/camera and /mnt/zip
directories, and close any programs such as konqueror that may be allowing you to view the files. Once this has been done I would expect the umount commands to work, without the -f. Then you can change the memory card and mount the new one.
Regards,
Mark
-
![Quote](images/misc/quote_icon.png)
Originally Posted by
markpreston
Once you have finished downloading or copying your photo files you need to change back out of the /mnt/camera and /mnt/zip
directories, and close any programs such as konqueror that may be allowing you to view the files. Once this has been done I would expect the umount commands to work, without the -f. Then you can change the memory card and mount the new one.
When using Konqueror check the following setting:
Code:
1. Select Settings -> Configure Konqueror
2. Select the 'Performance' icon at the bottom
3. Make sure that in the preloading sections, the number of preloaded instances is 0
This way you make sure that Konqueror *really* closes and frees any resouorces it might hold, particularly mounted devices.
top is a pretty ps -ef
--GN
-
Senior Member
registered user
I don't know much about #1 but I have a zip and I have to wait for it to stop spinning and then it works great. If I mount it right away then everything works properly even if it is still spinning/working. Never had any problem with a busy zip. Need more info to help.
-
![Quote](images/misc/quote_icon.png)
Originally Posted by
rrfish72
I don't know much about #1 but I have a zip and I have to wait for it to stop spinning and then it works great. If I mount it right away then everything works properly even if it is still spinning/working. Never had any problem with a busy zip. Need more info to help.
I had the problem with USB / PCMCIA flash drives too. By removing the memory cards/sticks too soon or with unsuccesful umounts I ended with corrupted files. Konqueror is not the only offender, but since I changed the setting I don't have the problem as often.
--GN
Similar Threads
-
By wmlabChuck in forum Hardware & Booting
Replies: 0
Last Post: 05-17-2005, 04:37 PM
-
By oman in forum General Support
Replies: 0
Last Post: 08-03-2004, 06:44 PM
-
By kimanaw in forum Networking
Replies: 0
Last Post: 02-10-2004, 12:52 AM
-
By YuXeL in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 12-08-2003, 01:48 AM
-
By JustMike in forum General Support
Replies: 2
Last Post: 09-28-2003, 02:53 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Dell PowerEdge FX2S FC830 Blade Server Chassis Enclosure 2*2000W PSU NO BLADES picture](/store/img/g/a4EAAOSwJhJmPSdt/s-l225/Dell-PowerEdge-FX2S-FC830-Blade-Server-Chassis-Enc.jpg)
Dell PowerEdge FX2S FC830 Blade Server Chassis Enclosure 2*2000W PSU NO BLADES
$299.99
![Dell PowerEdge M620 Blade Server 2x 10C E5-2690v2 64GB Ram 2x 600GB 10k HDD picture](/store/img/g/JBcAAOSwdu1mXLZT/s-l225/Dell-PowerEdge-M620-Blade-Server-2x-10C-E5-2690v2-.jpg)
Dell PowerEdge M620 Blade Server 2x 10C E5-2690v2 64GB Ram 2x 600GB 10k HDD
$125.00
![Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W picture](/store/img/g/9HsAAOSw3OZmMT~n/s-l225/Dell-PowerEdge-FX2s-CTO-Blade-4-Slot-2U-Chassis-2x.jpg)
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
![Dell PowerEdge FC830 8-SFF 4*Xeon E5-4669v3 2.1GHz No HDD/RAM Blade Server Node picture](/store/img/g/z5AAAOSwsh9mTla-/s-l225/Dell-PowerEdge-FC830-8-SFF-4-Xeon-E5-4669v3-2-1GHz.jpg)
Dell PowerEdge FC830 8-SFF 4*Xeon E5-4669v3 2.1GHz No HDD/RAM Blade Server Node
$199.99
![Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD picture](/store/img/g/HUMAAOSwj3ZmdO6c/s-l225/Dell-PowerEdge-M620-Blade-Server-2-x-Xeon-e5-2665-.jpg)
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$44.99
![Dell PowerEdge M520 Blade Server Xeon E5-2403 NO HDD NO RAM picture](/store/img/g/VFIAAOSwXbhmYLj1/s-l225/Dell-PowerEdge-M520-Blade-Server-Xeon-E5-2403-NO-H.jpg)
Dell PowerEdge M520 Blade Server Xeon E5-2403 NO HDD NO RAM
$40.00
![Dell PowerEdge M610 Blade Server E5620@2.2GHZ (6x)8GB RAM (2x)146GB 15K SAS HDD picture](/store/img/g/5WkAAOSwOGtmet-8/s-l225/Dell-PowerEdge-M610-Blade-Server-E5620-2-2GHZ-6x-8.jpg)
Dell PowerEdge M610 Blade Server E5620@2.2GHZ (6x)8GB RAM (2x)146GB 15K SAS HDD
$79.00
![HP P17342-B21 M750 E2286M CTO BLADE SERVER picture](/store/img/g/pv8AAOSwmIJlcebB/s-l225/HP-P17342-B21-M750-E2286M-CTO-BLADE-SERVER.jpg)
HP P17342-B21 M750 E2286M CTO BLADE SERVER
$269.95
![HP ProLiant BL460c Gen9 Blade 2x E5-2690v4 2.6GHz =28 Cores 32GB P246 650FLB picture](/store/img/g/ofQAAOSw62Rk0wlt/s-l225/HP-ProLiant-BL460c-Gen9-Blade-2x-E5-2690v4-2-6GHz-.jpg)
HP ProLiant BL460c Gen9 Blade 2x E5-2690v4 2.6GHz =28 Cores 32GB P246 650FLB
$223.00
![Dell PowerEdge C6320 82F9M Server Blade Module 10gb SFP+ 082F9M picture](/store/img/g/~C8AAOSwTyll-dXZ/s-l225/Dell-PowerEdge-C6320-82F9M-Server-Blade-Module-10g.jpg)
Dell PowerEdge C6320 82F9M Server Blade Module 10gb SFP+ 082F9M
$79.99