First of all,greetings!!
Tonight i downloaded Knoppix 3.6,because i decided that i wanted something different from windows,and because of the livecd function it provides,i figured Knoppix would be a safe bet.I burned it,and had checksummed it without errors,so i guess that's not the problem at all.What the problem is,is that i can't boot from my BIOS,period.I have a Dell Dimension 8200,and in the past i've had nothing but problems with trying to boot cd's from my BIOS.Now i did some googling,and came upon the suggestion that,under DOS i should use rawrite.exe which is supposed to be on the Knoppix cd,but sadly,it is not.
I've also read that under linux i should type something like dd if=/cdrom/KNOPPIX/boot.img of=/dev/fd0 bs=18k,or so.But since i don't linux on my comp,this is also not possible at the moment.Does anyone got any other suggestions?I would greatly appreciate it.
Thanks in advance
Gemantra
http://www.knoppix.net/forum/viewtop...1796&start=150
Describes a method to boot Knoppix from the iso file on the hard disk, using grub chainloaded from the Windows Boot Loader (so you can add Grub to your windows boot options and then boot to knoppix). You could also use it to just boot the cd normally.
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
Lot of 2 32GB DDR4 2666 PC4-21300 SODIMM RAM Modules Mixed Brand
$60.00
Samsung 16GB 2Rx4 PC4-2400 RDIMM DDR4-19200 ECC REG Registered Server Memory RAM
$20.99
Samsung 128GB (4x 32GB) M86B4G70DM0-CMA3 PC3-14900L 4Rx4 DDR3 ECC Reg Server Mem
$39.99
8GB PC3L-12800S 1600MHz SODIMM DDR3 RAM | Grade A
$12.00
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 128GB 2x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$143.98