I have seen HD installs lose network settings so I add a dhcp entry to /etc/network/interfaces
auto lo eth0
iface lo inet loopback
iface eth0 inet dhcp
Hello,
When i boot using the live CD (Knoppix 2.7) everything goes fine on my Dell D600. But When i install it on Hdd i loose network, usb support language (ok not so important this).
I have used knoppix-installer with the tow options in configuration : beginner and knoppix, and both have the same end ...
So how can i set the same configuration as with live CD auto config?
Or if you have a good tutorial
Thanks!
Scott
I have seen HD installs lose network settings so I add a dhcp entry to /etc/network/interfaces
auto lo eth0
iface lo inet loopback
iface eth0 inet dhcp
Part of the fun of linux is learning it. A few tweaks here and there and you will be right back to where you were. This is normal that a hd install does not have everything configured.
To get your network going try configuring the network card in the K menu-->knoppix-->network/internet-->network card configuration. Sometimes you have to do it more than once to get the connection started, at least with mine after a fresh install (dsl modem). Until you see auto lo eth0, that's when I know my network is up.
What type of usb support are you talking about?
The lang can be changed in the lilo.conf append line by changing the lang=de or whatever to lang=us if you want english. I think there is another place to change it but I never had to, the lilo.conf change was good enough. Hope this helps.
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD 
$180.00
Dell Poweredge R730xd 12 Bay LFF 2x SFF 2x E5-2680v3 2.5ghz H730p No Ram No HDD
$219.99
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$489.99
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$44.99
DELL R630 Server 2x E5-2690 V3 2.60GHz = 24 Cores 64GB DDR4 Onboard SATA iDRAC8
$275.00
DELL PowerEdge R730XD Server 2x E5-2680v3 2.5GHz =24 Cores 32GB H730 4xRJ45
$267.00
DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$226.00