Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: USB Hardware detection problems

  1. #21
    Junior Member registered user
    Join Date
    Nov 2003
    Location
    belgium
    Posts
    27
    I was able to solve the usb mouse detection problem by installing knoppix on my hard disk, set up gpm with the following configuration options: <gpm.conf>
    device=/dev/input/mice
    responsiveness=
    repeat_type=raw
    type=autops2
    append=""
    sample_rate=
    </gpm.conf>, and by changing the XF86Config-4 file in the sections <ServerLayout> InputDevice "USB Mouse" "CorePointer"
    </ServerLayout> and adding a new <Section "InputDevice">
    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/gpmdata"
    Option "SendCoreEvents" "true"
    Option "Protocol" "auto"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "5"
    EndSection
    <Section "InputDevice">.

    I have also automated this procedure adding a few symbolic links:
    /etc/rc0.d/K20gpm -> ../init.d/gpm
    /etc/rc1.d/K20gpm -> ../init.d/gpm
    /etc/rc2.d/S20gpm -> ../init.d/gpm
    /etc/rc3.d/S20gpm -> ../init.d/gpm
    /etc/rc4.d/S20gpm -> ../init.d/gpm
    /etc/rc5.d/K20gpm -> ../init.d/gpm
    /etc/rc5.d/S20gpm -> ../init.d/gpm
    /etc/rc6.d/K20gpm -> ../init.d/gpm

    cu, g.

  2. #22
    Junior Member
    Join Date
    Nov 2003
    Location
    Venezuela
    Posts
    2

    FLASH CARD READER MSC USB (something)

    I am a newbie and i have problems with Knoppix installed in my hdard drive, how can i install a driver for this USB card reader, and i canīt work either with mzip tools it doesnīt detecth my paralell Zip drive, some times at boot it gets frozens. Thank you for your help...

  3. #23
    Senior Member registered user
    Join Date
    Apr 2005
    Location
    italy
    Posts
    245
    Quote Originally Posted by dmiller
    for my hp psc2210 I had to download and install hpijs from the hp website. This was the essential piece of glue to get the HP printer to work under knoppix. comes with instructions for how to install in linux and check if it is working....
    Summary,
    suggest searcing the HP site for HPIJS .
    I searched but found nothing in HP site and still unable to print with my psc2210.
    Any links or suggestions?

  4. #24
    Junior Member
    Join Date
    Jul 2005
    Posts
    4
    Problem: Autoconfiguration Hangs endlessly on boot with Knoppix 3.9
    Solved by: knoppix nousb (at boot)
    Suspect: Newer PCI Express specification not recognized

    Computer: Fujitsu N3511 laptop ( Brand New )

    Question:
    How can you manually load the USB drivers 'after' a 'knoppix nousb' boot option?

    Question 2:
    Has anyone gotten knoppix 3.9 running with a PCI Express featured system?

    I was surprised to learn that the new PCI express spec also applies to the USB bus...
    maybe this is a factor in Knoppix 3.9 failure to detect the USB properly???

    I don't know if this applies, but here below are the results from a lspci:

    root@0[knoppix]# lspci | grep -i usb
    0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
    0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
    0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
    0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
    0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)

    root@0[knoppix]# lspci -vv -s 00:1d.0
    0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) (prog-if 00 [UHCI])
    Subsystem: Fujitsu Limited.: Unknown device 12e8
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin A routed to IRQ 5
    Region 4: I/O ports at 1200 [size=32]

Page 3 of 3 FirstFirst 123

Similar Threads

  1. Hardware Detection question
    By obsoleto in forum Hardware & Booting
    Replies: 1
    Last Post: 06-04-2004, 05:11 PM
  2. Hardware detection
    By jcostello in forum Hardware & Booting
    Replies: 1
    Last Post: 04-24-2004, 01:33 AM
  3. Add special hardware to the hardware detection on boot
    By Danmak in forum Hardware & Booting
    Replies: 3
    Last Post: 12-01-2003, 03:40 AM
  4. Hardware Detection
    By staverts in forum Hardware & Booting
    Replies: 0
    Last Post: 07-28-2003, 06:48 AM
  5. Hardware detection after HD install
    By Christer in forum Hdd Install / Debian / Apt
    Replies: 1
    Last Post: 04-02-2003, 03:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Vintage ATARI MEGA ST 2 POWERS ON picture

Vintage ATARI MEGA ST 2 POWERS ON

$139.99



Vintage Atari 400 Computer System w/ Atari 410 Program Recorder picture

Vintage Atari 400 Computer System w/ Atari 410 Program Recorder

$110.00



Atari 1050 5.25

Atari 1050 5.25" Floppy Disk Drive w/ CO17945 Power Adaptor - Powers On

$49.99



Atari 800XL with SubLOGIC Flight Simulator Power Supply RF cable Switch Box picture

Atari 800XL with SubLOGIC Flight Simulator Power Supply RF cable Switch Box

$350.00



Atari 130xe Computer Case (no keyboard, no motheboard) picture

Atari 130xe Computer Case (no keyboard, no motheboard)

$40.00



Atari 1090XL Reproduction Main Board with two cards. picture

Atari 1090XL Reproduction Main Board with two cards.

$249.42



Atari 400/800/XL/XE Computer SIO2PC - PC/Mac Disk Drive Emulator Adapter/Device picture

Atari 400/800/XL/XE Computer SIO2PC - PC/Mac Disk Drive Emulator Adapter/Device

$15.25



Lot of Atari 400 & 800XL Computers, 1050 Floppy Disk Drive, Joysticks, & Games picture

Lot of Atari 400 & 800XL Computers, 1050 Floppy Disk Drive, Joysticks, & Games

$350.00



A8picoCart Atari 130 / 65 XE 800 / 1200 XL XEGS multicart UnoCart clone game picture

A8picoCart Atari 130 / 65 XE 800 / 1200 XL XEGS multicart UnoCart clone game

$32.95



Atari 600XL Computer Bundle TESTED WORKING With Cassette Recorder Atariwriter picture

Atari 600XL Computer Bundle TESTED WORKING With Cassette Recorder Atariwriter

$161.95