-
A bunch of knoppix questions.....
I will pleased to get answer's to any of these questions, bearing in mind I know little about linux
Firstly I have three main drives when I bootup besides the cdrom and floppy drive
Hda1 - My Windows NTFS partition
Hda2 - My Linux Partition
Sda1 - My Pen Drive
Firstly I want all of these drives mounted when I boot up.
Secondly I want so that all apps have read/write access to all these drives - I do know about permissions from having used chmod's on redhat web server's (via ftp) so I changed them on sda1 (777) however when I open things up in openoffice they are still read only
[edit - I fixed the problem by changing the permissions elsewhere on SDA1 - but I still have the saem problem on HDA 1 and 2]
Thirdly I would like if possible the pen drive to be like a windows pen drive - is appears as a drive when you put it in and disappears when you take it out.
Also when I installed knoppix, I had to use a third party installation app - and it set my lanquage as german - which I can bearly understand - if I was going to use any foreign lanquage it would have been french. Anway I changed back the lanquage for kde after findign the right option in control center, but mozilla and gaim are still in german - how can I change this?
And last but not least - I have six gig of apps I want to get rid of a few because I don't need them - how do I this.
-
Senior Member
registered user
Re: A bunch of knoppix questions.....
![Quote](images/misc/quote_icon.png)
Originally Posted by
jatos
I will pleased to get answer's to any of these questions, bearing in mind I know little about linux
Firstly I have three main drives when I bootup besides the cdrom and floppy drive
Hda1 - My Windows NTFS partition
Hda2 - My Linux Partition
Sda1 - My Pen Drive
Firstly I want all of these drives mounted when I boot up.
Secondly I want so that all apps have read/write access to all these drives - I do know about permissions from having used chmod's on redhat web server's (via ftp) so I changed them on sda1 (777) however when I open things up in openoffice they are still read only
[edit - I fixed the problem by changing the permissions elsewhere on SDA1 - but I still have the saem problem on HDA 1 and 2]
Thirdly I would like if possible the pen drive to be like a windows pen drive - is appears as a drive when you put it in and disappears when you take it out.
Also when I installed knoppix, I had to use a third party installation app - and it set my lanquage as german - which I can bearly understand - if I was going to use any foreign lanquage it would have been french. Anway I changed back the lanquage for kde after findign the right option in control center, but mozilla and gaim are still in german - how can I change this?
And last but not least - I have six gig of apps I want to get rid of a few because I don't need them - how do I this.
First & second: edit your /etc/fstab replace 'noauto' with 'auto' (or leave it off...'auto' is the default) to have your drives mount on automatically on startup. Add a 'umask' entry to have the drive mount read/write or not as you wish. (Do NOT mount a windows NTFS partition read/write, linux cannot write to NTFS drives).
example:
/dev/hda1 /mnt/hda1 vfat umask=022,users 0 0
/dev/hda7 /mnt/hda7 vfat shortname=mixed,umask=000,users 0 0
hda1 is mounted read only for users, read/write for root. hda7 is read/write for all. shortname=mixed allows capitals in filenames, otherwise vfat drives use all lower case
see man fstab for more info.
Third: You would need to use automounter for this. Don't know how, I don't have a pen drive. Perhaps someone else will respond...
Fourth:
What 'third party installation app? Knoppix has a built in HD installer ("knoppix-installer"). Anyway, assuming you have lilo, bootcodes are contained in the 'append=' line in /etc/lilo.conf. Edit to add 'lang=us' to the append= line in lilo.conf then rerun lilo (enter "lilo" as root) to implement the changes.
Fifth: 6Gigs! You must have a lot of extras, Knoppix usually installs to 2.3 Gigs.
Adding/removing apps on a Debian based system is done with dpkg & apt-get. See this: http://www.knoppix.net/forum/viewtopic.php?t=15298
for info on installing programs in Debian. Also check out the apt-get/dpkg tutorial on this forum.
-
Thankyou for that but one question: how do I start kwrite as root so I can actually edit fstab?
-
Junior Member
registered user
open a root terminal and type
kwrite
that'll get you kwrite as root.
Similar Threads
-
By Vyper in forum Hardware & Booting
Replies: 3
Last Post: 02-09-2006, 11:05 PM
-
By beforewisdom in forum General Support
Replies: 3
Last Post: 01-05-2005, 02:41 PM
-
By stuart_b in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 08-19-2004, 10:10 PM
-
By Paper_Sack in forum General Support
Replies: 5
Last Post: 10-18-2003, 06:38 PM
-
By Jorah in forum General Support
Replies: 1
Last Post: 10-04-2003, 05:37 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![TP-Link 24-Port Gigabit Ethernet Unmanaged Switch Desktop/Rackmount TL-SG1024D picture](/store/img/g/rvkAAOSwZBBi5CPU/s-l225/TP-Link-24-Port-Gigabit-Ethernet-Unmanaged-Switch-.jpg)
TP-Link 24-Port Gigabit Ethernet Unmanaged Switch Desktop/Rackmount TL-SG1024D
$69.99
![Dell X1018 X-Series Smart Managed Switches 16-Port Gigabit 2-Port SFP Switch picture](/store/img/g/-yUAAOSw-JVlyRj9/s-l225/Dell-X1018-X-Series-Smart-Managed-Switches-16-Port.jpg)
Dell X1018 X-Series Smart Managed Switches 16-Port Gigabit 2-Port SFP Switch
$42.00
![BrosTrend 8-Port 2.5G Ethernet Switch Multi-Gigabit Unmanaged Network Switch picture](/store/img/g/9JMAAOSw33tmeZ1P/s-l225/BrosTrend-8-Port-2-5G-Ethernet-Switch-Multi-Gigabi.jpg)
BrosTrend 8-Port 2.5G Ethernet Switch Multi-Gigabit Unmanaged Network Switch
$49.97
![CISCO MERAKI MS120-24P-HW 24-PORT GIGABIT CLOUD MANAGED PoE SWITCH - UNCLAIMED picture](/store/img/g/uj4AAOSw8hhmYQRm/s-l225/CISCO-MERAKI-MS120-24P-HW-24-PORT-GIGABIT-CLOUD-MA.jpg)
CISCO MERAKI MS120-24P-HW 24-PORT GIGABIT CLOUD MANAGED PoE SWITCH - UNCLAIMED
$98.55
![NETGEAR GS108 ProSafe 8-Port GbE Unmanaged Switch w/ Power Adapter picture](/store/img/g/GtAAAOSw441l3Jx1/s-l225/NETGEAR-GS108-ProSafe-8-Port-GbE-Unmanaged-Switch-.jpg)
NETGEAR GS108 ProSafe 8-Port GbE Unmanaged Switch w/ Power Adapter
$14.99
![Dell X1026P E11W 24-Port PoE Smart Managed Gigabit Ethernet Switch 2X SFP picture](/store/img/g/KhoAAOSwVqZmUJTH/s-l225/Dell-X1026P-E11W-24-Port-PoE-Smart-Managed-Gigabit.jpg)
Dell X1026P E11W 24-Port PoE Smart Managed Gigabit Ethernet Switch 2X SFP
$25.00
![Dell X1052P Series 52-Port Gigabit Rack Mountable Managed Network Switch picture](/store/img/g/IjQAAOSwqrVmUJen/s-l225/Dell-X1052P-Series-52-Port-Gigabit-Rack-Mountable-.jpg)
Dell X1052P Series 52-Port Gigabit Rack Mountable Managed Network Switch
$30.00
![DELL 48 Port Gigabit Ethernet Network Switch POWERCONNECT 5548 FXP1R picture](/store/img/g/ZTMAAOSwodNl4jlF/s-l225/DELL-48-Port-Gigabit-Ethernet-Network-Switch-POWER.jpg)
DELL 48 Port Gigabit Ethernet Network Switch POWERCONNECT 5548 FXP1R
$50.00
![Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED picture](/store/img/g/kjQAAOSwNkhj0o7Y/s-l225/Fortinet-FortiSwitch-FS-124D-POE-24-Port-Gigabit-E.jpg)
Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED
$99.97
![Cisco Nexus N3K-C3064PQ-10GX 48P 10GbE SFP+ 4P QSFP+ Switch (Fair) picture](/store/img/g/K9MAAOSw-4JmfV3v/s-l225/Cisco-Nexus-N3K-C3064PQ-10GX-48P-10GbE-SFP-4P-QSFP.jpg)
Cisco Nexus N3K-C3064PQ-10GX 48P 10GbE SFP+ 4P QSFP+ Switch (Fair)
$85.00