-
A bunch of knoppix questions.....
I will pleased to get answer's to any of these questions, bearing in mind I know little about linux
Firstly I have three main drives when I bootup besides the cdrom and floppy drive
Hda1 - My Windows NTFS partition
Hda2 - My Linux Partition
Sda1 - My Pen Drive
Firstly I want all of these drives mounted when I boot up.
Secondly I want so that all apps have read/write access to all these drives - I do know about permissions from having used chmod's on redhat web server's (via ftp) so I changed them on sda1 (777) however when I open things up in openoffice they are still read only
[edit - I fixed the problem by changing the permissions elsewhere on SDA1 - but I still have the saem problem on HDA 1 and 2]
Thirdly I would like if possible the pen drive to be like a windows pen drive - is appears as a drive when you put it in and disappears when you take it out.
Also when I installed knoppix, I had to use a third party installation app - and it set my lanquage as german - which I can bearly understand - if I was going to use any foreign lanquage it would have been french. Anway I changed back the lanquage for kde after findign the right option in control center, but mozilla and gaim are still in german - how can I change this?
And last but not least - I have six gig of apps I want to get rid of a few because I don't need them - how do I this.
-
Senior Member
registered user
Re: A bunch of knoppix questions.....
![Quote](images/misc/quote_icon.png)
Originally Posted by
jatos
I will pleased to get answer's to any of these questions, bearing in mind I know little about linux
Firstly I have three main drives when I bootup besides the cdrom and floppy drive
Hda1 - My Windows NTFS partition
Hda2 - My Linux Partition
Sda1 - My Pen Drive
Firstly I want all of these drives mounted when I boot up.
Secondly I want so that all apps have read/write access to all these drives - I do know about permissions from having used chmod's on redhat web server's (via ftp) so I changed them on sda1 (777) however when I open things up in openoffice they are still read only
[edit - I fixed the problem by changing the permissions elsewhere on SDA1 - but I still have the saem problem on HDA 1 and 2]
Thirdly I would like if possible the pen drive to be like a windows pen drive - is appears as a drive when you put it in and disappears when you take it out.
Also when I installed knoppix, I had to use a third party installation app - and it set my lanquage as german - which I can bearly understand - if I was going to use any foreign lanquage it would have been french. Anway I changed back the lanquage for kde after findign the right option in control center, but mozilla and gaim are still in german - how can I change this?
And last but not least - I have six gig of apps I want to get rid of a few because I don't need them - how do I this.
First & second: edit your /etc/fstab replace 'noauto' with 'auto' (or leave it off...'auto' is the default) to have your drives mount on automatically on startup. Add a 'umask' entry to have the drive mount read/write or not as you wish. (Do NOT mount a windows NTFS partition read/write, linux cannot write to NTFS drives).
example:
/dev/hda1 /mnt/hda1 vfat umask=022,users 0 0
/dev/hda7 /mnt/hda7 vfat shortname=mixed,umask=000,users 0 0
hda1 is mounted read only for users, read/write for root. hda7 is read/write for all. shortname=mixed allows capitals in filenames, otherwise vfat drives use all lower case
see man fstab for more info.
Third: You would need to use automounter for this. Don't know how, I don't have a pen drive. Perhaps someone else will respond...
Fourth:
What 'third party installation app? Knoppix has a built in HD installer ("knoppix-installer"). Anyway, assuming you have lilo, bootcodes are contained in the 'append=' line in /etc/lilo.conf. Edit to add 'lang=us' to the append= line in lilo.conf then rerun lilo (enter "lilo" as root) to implement the changes.
Fifth: 6Gigs! You must have a lot of extras, Knoppix usually installs to 2.3 Gigs.
Adding/removing apps on a Debian based system is done with dpkg & apt-get. See this: http://www.knoppix.net/forum/viewtopic.php?t=15298
for info on installing programs in Debian. Also check out the apt-get/dpkg tutorial on this forum.
-
Thankyou for that but one question: how do I start kwrite as root so I can actually edit fstab?
-
Junior Member
registered user
open a root terminal and type
kwrite
that'll get you kwrite as root.
Similar Threads
-
By Vyper in forum Hardware & Booting
Replies: 3
Last Post: 02-09-2006, 11:05 PM
-
By beforewisdom in forum General Support
Replies: 3
Last Post: 01-05-2005, 02:41 PM
-
By stuart_b in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 08-19-2004, 10:10 PM
-
By Paper_Sack in forum General Support
Replies: 5
Last Post: 10-18-2003, 06:38 PM
-
By Jorah in forum General Support
Replies: 1
Last Post: 10-04-2003, 05:37 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W picture](/store/img/g/W38AAOSwtcVjVC0Z/s-l225/Dell-PowerEdge-R730-2x-E5-2699V3-2-3Ghz-36-Core-12.jpg)
Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W
$329.99
![Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD picture](/store/img/g/vx0AAOSwvwFlExVY/s-l225/Dell-PowerEdge-R630-Server-2x-E5-2680-V4-28-Cores-.jpg)
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
![Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330 picture](/store/img/g/ZD0AAOSwm41mOZYw/s-l225/Dell-PowerEdge-R630-Server-2x-E5-2640v3-2-60Ghz-16.jpg)
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
![Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays picture](/store/img/g/GAcAAOSw9Q1mGSZW/s-l225/Dell-Poweredge-R630-Server-2x-E5-2620-V4-16-Cores-.jpg)
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
![Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD  picture](/store/img/g/yAwAAOSwdyNlgQ8d/s-l225/Dell-PowerEdge-R720xd-26HDD-300gb-2-5-inch-E5-2697.jpg)
Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD 
$180.00
![Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox picture](/store/img/g/480AAOSw9TVl9vAv/s-l225/Dell-PowerEdge-R620-Server-256GB-RAM-2x8cCPU-120Gb.jpg)
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox
$320.00
![Dell PowerEdge R330 Intel Xeon E3-1220 v5 3.0GHz 8GB PC4 Ram w/Raid Card Server picture](/store/img/g/GoEAAOSwrZZkrZ8H/s-l225/Dell-PowerEdge-R330-Intel-Xeon-E3-1220-v5-3-0GHz-8.jpg)
Dell PowerEdge R330 Intel Xeon E3-1220 v5 3.0GHz 8GB PC4 Ram w/Raid Card Server
$149.99
![Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 120Gb SSD/3x900Gb SAS, Proxmox picture](/store/img/g/hv0AAOSw0Ilmb252/s-l225/Dell-PowerEdge-R720-Server-2x8c-CPU-256Gb-RAM-120G.jpg)
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 120Gb SSD/3x900Gb SAS, Proxmox
$340.00
![Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config picture](/store/img/g/CdkAAOSwY0BmYMoF/s-l225/Dell-Poweredge-R730xd-LFF-14-Bay-2U-Server-Choose-.jpg)
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$477.99
![DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 256GB H730 4xRJ45 picture](/store/img/g/qfQAAOSw9XRklkNR/s-l225/DELL-PowerEdge-R630-8SFF-Server-2x-E5-2690v4-2-6GH.jpg)
DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 256GB H730 4xRJ45
$530.00