Results 1 to 2 of 2

Thread: knx2hd issu

  1. #1
    Member registered user
    Join Date
    Oct 2004
    Posts
    31

    knx2hd issu

    sudo knx2hd

    Can't remove /usr/share/applications/./Ethereal.desktop: Système de fichiers accessible en lecture seulement, skipping file.
    Can't remove /usr/share/applications/./EtherealAsRoot.desktop: Système de fichiers accessible en lecture seulement, skipping file.
    Can't remove /usr/share/applications/./qtparted.desktop: Système de fichiers accessible en lecture seulement, skipping file.
    Can't remove /usr/share/applnk/./Settings/Peripherals/kxconfig.desktop: Système de fichiers accessible en lecture seulement, skipping file.
    /dev/mapper/control: open failed: No such device
    Is device-mapper driver missing from kernel?
    /dev/mapper/control: open failed: No such device
    Is device-mapper driver missing from kernel?
    Incompatible libdevmapper 1.00.19-ioctl (2004-07-03)(compat) and kernel driver
    Warning: Unable to determine video adapter in use in the present system.
    mke2fs 1.35 (28-Feb-2004)
    Étiquette de système de fichiers=
    Type de système d'exploitation: Linux
    Taille de bloc=1024 (log=0)
    Taille de fragment=1024 (log=0)
    184 inodes, 1440 blocs
    72 blocs (5.00%) réservé pour le super usager
    Premier bloc de données=1
    1 bloc de groupe
    8192 blocs par groupe, 8192 fragments par groupe
    184 inodes par groupe

    Écriture des tables d'inodes: complété
    Écriture des superblocs et de l'information de comptabilité du système de fichiers: complété

    Le système de fichiers sera automatiquement vérifié à chaque 23 mois ou
    180 jours, selon la première éventualité. Utiliser tune2fs -c ou -i pour écraser la valeur.
    Ignoring entry 'boot'
    Ignoring entry 'install'
    Ignoring entry 'map'
    Warning: COMPACT may conflict with LBA32 on some systems
    /dev/mapper/control: open failed: No such device
    Is device-mapper driver missing from kernel?
    /dev/mapper/control: open failed: No such device
    Is device-mapper driver missing from kernel?
    Incompatible libdevmapper 1.00.19-ioctl (2004-07-03)(compat) and kernel driver
    Warning: Unable to determine video adapter in use in the present system.
    Added Linux *
    Added Linux(2.4)-1
    Added Linux(2.6)-2
    Added Windows(hda1)

    let's see if it will boot

  2. #2
    Member registered user
    Join Date
    Oct 2004
    Posts
    31
    ok it boot's

    tryed to install nvidia driver get the nvidia-logo but kdm crash get a black box .. Is ther a modul to unload or samthing else


    Same thing like riva??? placholder for me my dmseg

    dmesg
    Linux version 2.4.27 (root@Koffer) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 SMP Mo Aug 9 00:39:37 CEST 2004
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 0000000013ff0000 (usable)
    BIOS-e820: 0000000013ff0000 - 0000000013ff3000 (ACPI NVS)
    BIOS-e820: 0000000013ff3000 - 0000000014000000 (ACPI data)
    BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    319MB LOWMEM available.
    On node 0 totalpages: 81904
    zone(0): 4096 pages.
    zone(1): 77808 pages.
    zone(2): 0 pages.
    ACPI disabled because your bios is from 98 and too old
    You can enable it with acpi=force
    Kernel command line: BOOT_IMAGE=Linux(2.4)-1 ro root=302 ramdisk_size=100000 lang=fr noscsi noapm nodhcp
    Local APIC disabled by BIOS -- reenabling.
    Found and enabled local APIC!
    Initializing CPU#0
    Detected 334.095 MHz processor.
    Console: colour VGA+ 80x25
    Calibrating delay loop... 666.82 BogoMIPS
    Memory: 317376k/327616k available (1406k kernel code, 9856k reserved, 574k data, 144k init, 0k highmem)
    Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
    Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
    Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
    Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 128K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU: After generic, caps: 0183fbff 00000000 00000000 00000000
    CPU: Common caps: 0183fbff 00000000 00000000 00000000
    Enabling fast FPU save and restore... done.
    Checking 'hlt' instruction... OK.
    Checking for popad bug... OK.
    POSIX conformance testing by UNIFIX
    mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
    mtrr: detected mtrr type: Intel
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 128K
    Intel machine check reporting enabled on CPU#0.
    CPU: After generic, caps: 0183fbff 00000000 00000000 00000000
    CPU: Common caps: 0183fbff 00000000 00000000 00000000
    CPU0: Intel Celeron (Mendocino) stepping 00
    per-CPU timeslice cutoff: 365.52 usecs.
    SMP motherboard not detected.
    enabled ExtINT on CPU#0
    ESR value before enabling vector: 00000000
    ESR value after enabling vector: 00000000
    Using local APIC timer interrupts.
    calibrating APIC timer ...
    ..... CPU clock speed is 334.0777 MHz.
    ..... host bus clock speed is 66.8155 MHz.
    cpu: 0, clocks: 668155, slice: 334077
    CPU0<T0:668144,T1:334064,D:3,S:334077,C:668155>
    Waiting on wait_init_idle (map = 0x0)
    All processors have done init_idle
    ACPI: Subsystem revision 20040326
    ACPI: Interpreter disabled.
    PCI: PCI BIOS revision 2.10 entry at 0xfb230, last bus=1
    PCI: Using configuration type 1
    PCI: Probing PCI hardware
    PCI: Probing PCI hardware (bus 00)
    PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0
    Limiting direct PCI/PCI transfers.
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    VFS: Disk quotas vdquot_6.5.1
    Detected PS/2 Mouse Port.
    pty: 256 Unix98 ptys configured
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
    Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    PIIX4: IDE controller at PCI slot 00:07.1
    PIIX4: chipset revision 1
    PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hdaMA, hdbMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdcMA, hddMA
    hda: Maxtor 91080D5, ATA DISK drive
    hdc: CD-RW CR52, ATAPI CD/DVD-ROM drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: attached ide-disk driver.
    hda: host protected area => 1
    hda: 21095424 sectors (10801 MB) w/512KiB Cache, CHS=2616/128/63
    Partition check:
    hda: hda1 hda2 hda3 hda4
    ide: late registration of driver.
    SCSI subsystem driver Revision: 1.00
    libata version 1.02 loaded.
    kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
    kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
    Initializing Cryptographic API
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP, IGMP
    IP: routing cache hash table of 2048 buckets, 16Kbytes
    TCP: Hash tables configured (established 32768 bind 3276
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    RAMDISK: Compressed image found at block 0
    Freeing initrd memory: 3404k freed
    VFS: Mounted root (ext2 filesystem).
    Freeing unused kernel memory: 144k freed
    Journalled Block Device driver loaded
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    blk: queue c03661a0, I/O limit 4095Mb (mask 0xffffffff)
    EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
    Adding Swap: 524152k swap-space (priority -1)
    EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
    hdc: attached ide-scsi driver.
    scsi0 : SCSI host adapter emulation for IDE ATAPI devices
    Vendor: MSI Model: CD-RW CR52 Rev: 3.70
    Type: CD-ROM ANSI SCSI revision: 02
    Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
    sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.12
    usb.c: registered new driver usbdevfs
    usb.c: registered new driver hub
    usb-uhci.c: $Revision: 1.275 $ time 00:50:50 Aug 9 2004
    usb-uhci.c: High bandwidth mode enabled
    PCI: Found IRQ 10 for device 00:07.2
    usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 10
    usb-uhci.c: Detected 2 ports
    usb.c: new USB bus registered, assigned bus number 1
    hub.c: USB hub found
    hub.c: 2 ports detected
    usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
    Initializing USB Mass Storage driver...
    usb.c: registered new driver usb-storage
    USB Mass Storage support registered.
    Real Time Clock Driver v1.10f
    hub.c: new USB device 00:07.2-2, assigned address 2
    Linux Kernel Card Services 3.1.22
    options: [pci] [cardbus] [pm]
    hub.c: USB hub found
    hub.c: 4 ports detected
    usb.c: registered new driver hiddev
    usb.c: registered new driver hid
    hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
    hid-core.c: USB HID support drivers
    mice: PS/2 mouse device common for all mice
    Serial driver version 5.05c (2001-07-0 with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
    ttyS00 at 0x03f8 (irq = 4) is a 16550A
    ttyS01 at 0x02f8 (irq = 3) is a 16550A
    hub.c: new USB device 00:07.2-2.1, assigned address 3
    usb.c: USB device 3 (vend/prod 0x2770/0x9120) is not claimed by any active driver.
    Linux agpgart interface v0.99 (c) Jeff Hartmann
    agpgart: Maximum main memory to use for agp memory: 262M
    agpgart: Detected Intel 440BX chipset
    agpgart: AGP aperture is 64M @ 0xe0000000
    CSLIP: code copyright 1989 Regents of the University of California
    PPP generic driver version 2.4.2
    hub.c: new USB device 00:07.2-2.2, assigned address 4
    usb-uhci.c: interrupt, status 2, frame# 1696
    usb.c: USB device not accepting new address=4 (error=-110)
    PPP BSD Compression module registered
    PPP Deflate Compression module registered
    hub.c: new USB device 00:07.2-2.2, assigned address 5
    usb.c: USB device 5 (vend/prod 0x66f/0x4200) is not claimed by any active driver.
    parport0: PC-style at 0x378 (0x77 [PCSPP,TRISTATE,EPP]
    parport0: irq 7 detected
    parport0: Printer, EPSON Stylus COLOR 640
    lp0: using parport0 (polling).
    lp0: console ready
    hub.c: new USB device 00:07.2-2.4, assigned address 6
    input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb1:6.0
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
    Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
    sb: No ISAPnP cards found, trying standard ones...
    SB 4.13 detected OK (220)
    ISO 9660 Extensions: Microsoft Joliet Level 3
    ISO 9660 Extensions: RRIP_1991A
    device ppp0 entered promiscuous mode
    device ppp0 left promiscuous mode
    franz@meinpc:~$

Similar Threads

  1. knx2hd finds only one partition
    By init1 in forum Hdd Install / Debian / Apt
    Replies: 5
    Last Post: 08-01-2006, 08:04 PM
  2. knx2hd don't support ex2 ?
    By metavoid in forum Hdd Install / Debian / Apt
    Replies: 5
    Last Post: 09-08-2004, 09:45 AM
  3. lilo to MBR and not showing up after knx2hd
    By ldp in forum Hdd Install / Debian / Apt
    Replies: 4
    Last Post: 06-17-2004, 08:21 AM
  4. Help on the knx2hd
    By dou01553 in forum Hdd Install / Debian / Apt
    Replies: 5
    Last Post: 06-14-2004, 10:06 PM
  5. Help on the knx2hd (install on HD)
    By dou01553 in forum General Support
    Replies: 1
    Last Post: 06-14-2004, 02:21 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •