-
How to let Knoppix 3.7-HDD autoconfigure changed devices?
Thanks to Knoppix, I became re-motivated to experiment with Linux since I gave up early attempts years ago.
Meanwhile I installed Asterisk a.s.o. and found that Knoppix is a perfect environment for this, especially one
is a Linux beginner
Today, I have one itching question and hope some of the experts out here could solve this:
- during installation, found hardware was written into /etc/modules.
Switching the hdd from one PC to the other therefore results in problems.
Refering to /etc/modules is nice in terms of speeding up the bootup process, but
- how could I switch back to "autoconfigure" like the CD does, so I am more flexible?
or
alternatively, how could I force the autoconfig thru a lilo append command, so if you just switched
to a new PC, I would run autoconfig once and have the modules.conf rewritten?
Thanks for your suggestions.
Rob
-
Hi Rob,
> alternatively, how could I force the autoconfig thru a lilo append command, so if you just switched
> to a new PC, I would run autoconfig once and have the modules.conf rewritten?
this is exactly what I am looking for. Have you tried to run /etc/init.d/knoppix-autoconfig as root? It *should* work,
at least it claims to re-detect hardware, but obviously didn't detect the device I want to integrate.
Good luck!
Bod
-
Senior Member
registered user
If you do a Knoppix-style HD install it should autoconfigure everything with each boot. Sounds like the right approach for a HD that will be switched from one machine to another.
-
How to let Knoppix 3.7-HDD autoconfigure changed devices?
Deleting the file /etc/modules-2.4.27 results in "autoconfiguring devices" next time Knoppix boots.
So, doing this manually BEFORE switching to another machine is at least something....!
Still looking for an approach for this to become an option right before booting on a new machine.....
@crashedagain
Looks like it's not a Knoppix problem, but one of my general lack of understanding linux...
So this looks now becoming
[offtopic]
I get kernel panic one my 2nd machine trying to boot my knoppix-hdd from PC-1.
On my 2nd machine the hdd is connected to the internal PCI-IDE interface (IDE-0),
on my "original" knoppix machine the hdd is connected to an Enhanced-IDE-card, which appears
to be a SCSI interface to that PC's Bios (it's an older one, which doesn't recognize 40G-HDDs,
so I have to use this IDE-card).
The HDD is partioned to hde1 (boot) to hde3 -> Windows, FAT32 primary
hde5-6 is logical extended FAT32
hde7 is swap
hde8 is ext3 (knoppix)
hde9 is ext3
On the 2nd machine, everything would try to access in "hda-" ?.
Interesting though, I can boot windows from lilo menu, but when I try to access my Linux entries thru lilo, it starts
to load Linux, the penguin comes up, but after the first few messages I get "attempt to kernel panic".
Any hint....?
[/offtopic]
Thnx![/b]
Similar Threads
-
By cezar in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 01-26-2007, 12:59 PM
-
By mkklavz in forum Networking
Replies: 15
Last Post: 10-01-2006, 03:04 PM
-
By tommydl in forum Ideas
Replies: 0
Last Post: 03-29-2004, 08:30 AM
-
By deerwood in forum Hardware & Booting
Replies: 3
Last Post: 11-18-2003, 05:25 AM
-
By robrink in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 08-08-2003, 05:53 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
For Lenovo ideapad 5 15IIL05 15ARE05 15ITL05 15ALC05 Lcd Back Cover Rear Lid NEW
$49.98
NEW Palmrest Keyboard For Lenovo Thinkpad E15 Gen 2 20T8 20T9 Black 5M10W64513
$80.99
For Lenovo ideapad Flex 5 15IIL05 15ITL05 LCD Touch Screen Bezel 5D10S39643 New
$138.95
Lenovo 500w Gen 3 Laptop, 11.6" IPS Glass, N6000, 8GB, 128GB SSD, Win 11 Home
$186.99
Lenovo Ideapad 1i 15.6" FHD Notebook Intel Core i5-1235U 8GB RAM 256GB SSD
$339.99
Lenovo IP 5 16IAU7 16" 2.5K Chromebook i3-1215U 8GB Ram 128GB eMMC Chrome OS
$199.99
Lenovo Notebook IdeaPad 1 Laptop, N6000, 4GB, 128GB eMMC, Win 11 Home-Certified
$229.49
Lenovo ThinkPad Yoga 11e 11.6" 2in1 Touch Intel Core i3 4GB RAM 128GB SSD Win10
$59.00
~10th Gen~ 14" Lenovo i7 Quad Core Laptop: 16GB RAM 512GB SSD Windows 11 Pro
$359.99
Lenovo K14 AMD Laptop, 14" FHD IPS LED , Ryzen 5 5600U, 16GB, 256GB SSD
$569.00