1)Ip address for eth0 -> 1)Ip: 192.168.2.4
2)Network mask for eth0 -> 2)Subnet: 255.255.255.0
3)Broadcast for eth0 -> probably 192.168.2.255
4)Default gateway -> 3)Gateway: 192.168.2.1
5)Nameserver -> 159.99.125.2 and 159.99.125.3
Hi,
I'm on a lan network and my pc can connect to internet by an adsl router which is connected whith 2 other pc.
Now the problem is that I can configure may netcard from windows, but I can do it from linux knoppix.
PS
I try to lanch for the terminal netcardconfig (logging as root) and I try several combionationes, but it does'nt work.
So this is my windows netcard configuration:
1)Ip: 192.168.2.4
2)Subnet: 255.255.255.0
3)Gateway: 192.168.2.1
4)Primary dns: 159.99.125.2
5)Secondary dns: 159.99.125.3
And this is the parameters request from knoppix:
1)Ip address for eth0
2)Network mask for eth0
3)Broadcast for eth0
4)Default gateway
5)Nameserver
Can someone says the exactly corrispondence Windows Knoppix?
... sorry, I'm a newbie.....
By
Francy
1)Ip address for eth0 -> 1)Ip: 192.168.2.4
2)Network mask for eth0 -> 2)Subnet: 255.255.255.0
3)Broadcast for eth0 -> probably 192.168.2.255
4)Default gateway -> 3)Gateway: 192.168.2.1
5)Nameserver -> 159.99.125.2 and 159.99.125.3
Thanks very much for the council,
I try that, but it does'nt work anyway.
Now I can connect to the router if I digitize 198.161.2.1 in the browser and the router configuration pannel appear to me (I thinks it means that my netcard is well recognized and work propertly), but if i digitize any oder addres in the browser address bar, the answer is that there was an error and I can't connect .
What can it be?
How can I resolve this problem?
By
francy
my set up is this
i leave my primary dns as the routers ip because the router has a built in dns server which will do all the dns look ups for me.Code:ip = 192.168.1.3 subnet = 255.255.255.0 broadcast adress = 192.168.1.255 default gateway = 192.168.1.1 primary dns = 192.168.1.1
i suggest you do ipconfig in windows while you are connected to the net and copy that exact set up for linux. hope this helps
i forgot to add. you might want to scan your router using nmap -sU -v 192.168.2.1 -p 53 if it says its open then thats your dns server you should get away with just using that.
You was right,
I resolved the problem.
thanks very much!!!!!
Francy
Juniper Networks SRX-210 Secure Services Gateway VPN Firewall
$39.99
Cisco ASA5525-FTD-K9 Security Appliance with FirePower Services
$1000.00
Cisco FPR2110-ASA-K9 Firepower Security Appliance
$299.99
Ubiquiti Networks USG Unifi Security Gateway Router/Firewall
$29.95
WatchGuard Firebox M200 Network Firewall 8 Port Security Appliance Model ML3AE8
$299.99
New Fortinet FortiGate 40F Network Firewall FG-40F
$219.99
Fortinet Fortiwifi 60D FWF-60D Security Appliance Firewall Wifi VPN
$29.99
OPNsense six-port Gigabit router/firewall on Lanner FW-7535 hardware
$69.00
Fortinet Fortiwifi 60D FG-60D Security Appliance Firewall / VPN w/ AC Adapter
$34.97
Fortinet FortiGate 60F | 10 Gbps Firewall Security Throughput (FG-60F)- Open Box
$381.99