1)Ip address for eth0 -> 1)Ip: 192.168.2.4
2)Network mask for eth0 -> 2)Subnet: 255.255.255.0
3)Broadcast for eth0 -> probably 192.168.2.255
4)Default gateway -> 3)Gateway: 192.168.2.1
5)Nameserver -> 159.99.125.2 and 159.99.125.3
Hi,
I'm on a lan network and my pc can connect to internet by an adsl router which is connected whith 2 other pc.
Now the problem is that I can configure may netcard from windows, but I can do it from linux knoppix.
PS
I try to lanch for the terminal netcardconfig (logging as root) and I try several combionationes, but it does'nt work.
So this is my windows netcard configuration:
1)Ip: 192.168.2.4
2)Subnet: 255.255.255.0
3)Gateway: 192.168.2.1
4)Primary dns: 159.99.125.2
5)Secondary dns: 159.99.125.3
And this is the parameters request from knoppix:
1)Ip address for eth0
2)Network mask for eth0
3)Broadcast for eth0
4)Default gateway
5)Nameserver
Can someone says the exactly corrispondence Windows Knoppix?
...sorry, I'm a newbie.....
By
Francy
1)Ip address for eth0 -> 1)Ip: 192.168.2.4
2)Network mask for eth0 -> 2)Subnet: 255.255.255.0
3)Broadcast for eth0 -> probably 192.168.2.255
4)Default gateway -> 3)Gateway: 192.168.2.1
5)Nameserver -> 159.99.125.2 and 159.99.125.3
Thanks very much for the council,
I try that, but it does'nt work anyway.
Now I can connect to the router if I digitize 198.161.2.1 in the browser and the router configuration pannel appear to me (I thinks it means that my netcard is well recognized and work propertly), but if i digitize any oder addres in the browser address bar, the answer is that there was an error and I can't connect![]()
.
What can it be?
How can I resolve this problem?
By
francy
my set up is this
i leave my primary dns as the routers ip because the router has a built in dns server which will do all the dns look ups for me.Code:ip = 192.168.1.3 subnet = 255.255.255.0 broadcast adress = 192.168.1.255 default gateway = 192.168.1.1 primary dns = 192.168.1.1
i suggest you do ipconfig in windows while you are connected to the net and copy that exact set up for linux. hope this helps
i forgot to add. you might want to scan your router using nmap -sU -v 192.168.2.1 -p 53 if it says its open then thats your dns server you should get away with just using that.
You was right,
I resolved the problem.
thanks very much!!!!!
Francy
16GB DDR4 Corsair Vengeance LPX 3000 Mhz 1.35V Desktop Computer PC Memory RAM
$30.89
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$22.45
Team T-FORCE VULCAN Z 32GB (2 x 16GB) PC RAM DDR4 3200 (PC4 25600) Memory
$54.99
SK Hynix 8GB DDR4 1Rx16 -PC4-3200AA/ HMAA1GS6CJR6N-XN SODIMM
$10.00
8GB PC3L-12800S 1600MHz SODIMM DDR3 RAM | Grade A
$12.00
Team T-FORCE VULCAN Z 16GB (2 x 8GB) 288-Pin PC RAM DDR4 3200 (PC4 25600) Intel
$33.99
Micron 8GB DDR4 1Rx16 PC4-3200AA Laptop RAM Memory MTA4ATF1G64HZ-3G2E2
$10.00
(4 Piece) SK Hynix HMA84GR7AFR4N-VK DDR4-2666v 128GB (4x32GB) Workstation RAM
$199.95
32GB DDR4-2666 SODIMM Kingston KVR26S19D8/32 Equivalent Laptop Memory RAM New
$49.99