Try bott with cheatcode : knoppix atapicd
![]()
Hi all
New to this forum but not linux or knoppix... I have a burnt knoppix 3.6 cd, which has worked fine on other machines... but wont work on one which i need it.
The computer boots up... gets to the boot image page... then i press enter and it does a bit of hardware probing... and then stalls...
it stops on Looking for CDROM in: /dev/hda (which isnt my cdrom drive)
the last few lines b4 that were...
Scanning for USB/Firewire devices.... Done.
Enabling DMA acceleration for: hda [WDC blah blah]
Enabling DMA acceleration for: hdb [LTN525]
Looking for CDROM in: /dev/hda
and thats it... the same cd has worked on other machines b4... also on this one i notice that it was like in text mode boot up or something it didnt have any graphics to the boot process like other machines... but not concerned about that.
Cheers
Wolfsta![]()
Try bott with cheatcode : knoppix atapicd
![]()
You might also try knoppix nodma
cheers guys.. the knoppix atapicd worked.
Can anyone explain why this happens for me? i mean it loads the boot menu etc from cd and then what? all of a sudden it can't remember where it loaded from lol
Cheers
Wolfsta
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Dell PowerEdge R730 16-Bay 2.5” 2xE5-2695 v3 2.3Ghz 64GB iDRAC8 Ent H730 2x750W
$250.00
$90.00
Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD 
$180.00
Dell R630 8 SFF Server 2x E5-2650 V4 2.2GHz = 24 Cores 64GB DDR4 SATA Only 1x PS
$243.20
Dell Poweredge R730xd 12 Bay LFF 2x SFF 2x E5-2680v3 2.5ghz H730p No Ram No HDD
$219.99
DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$226.00
DELL PowerEdge R630 8SFF Server 2x E5-2697v3 2.6GHz =28 Cores 128GB H730 4xRJ45
$352.00