i am trying to install knoppix to a bootable usb device, and i cant get my kernel to boot.
i've set up grub on the mbr of the drive, and it comes up fine. whats weird is that grup things that the drive is (hd0,0), when i boot the drive the kernel cant find the init scrips. actually the first error that it compains about is: EXT2-fs error (device ramdis(1,0)): ext2_read_inode: unable to read inode block - inode=2785, block=16387.
the init option in grub is /etc/init, i copied that from the lilo config that was installed with knoppix, i am not sure if thats correct. i also made the initrd with the usb modules, so it should detect the drive, when it boots up. maybe the root option that i pass to the kernel is incorrect, but i've tried both sda1 and hda1, and niether works, it has to be one of them. anyone have any ideas?
Western Digital WD60PURZ 6TB Hard Drive SATA6 Gb/s 64MB Cache 3.5 Inch
$109.99
WF12F DELL 1TB 7.2K 6GBPS SATA 2.5'' HDD HARD DRIVE ST91000640NS 0WF12F
$25.00
Western Digital RED NASware 3.0 WD40EFRX 4 TB SATA III 3.5 in NAS HARD DRIVE
$99.99
WD 2TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0020BBK-WESN
$49.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$82.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$69.99
8TB Seagate Archive SATA 3.5" HDD Hard Drive 100% Healthy 200MB/s ST8000AS0002
$36.42
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$174.99
WD 4TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0040BBK-WESN
$69.99