Did you a defrag before starting?
If do it and try again.
A week or so ago, I was able to resize the Windows partition (fat32) by about 1.3 gb, and succesfully create an ext3 in the blank space. When I try to resize it again, but I got some ped_file resize error thing. The HD is only about 18 gb, the fat32 is about 16.7 gb and 10 gb full, and the ext3 is about 1.3 gb. Any ideas to what keeps causing this error?
Did you a defrag before starting?
If do it and try again.
Western Digital WD140EDGZ 14 TB, Internal, 5400 RPM, 3.5 inch Hard Drive
$99.00
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Hitachi 4TB 3.5" Hard Drive HUS724040ALE640 Ultrastar 7K4000 Internal 7.2K
$49.95
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
1TB HDD/SSD 2.5" SATA Hard Drive with Windows 10 or Windows 11 Pro Installed
$18.99
Seagate Exos X20 18TB SATA 6Gb/s 3.5" Enterprise Hard Drive - ST18000NM003D
$168.00
SAS - HGST Ultrastar 7K4000 HUS724040ALA640 0F14688 3.5" 4TB 7.2K RPM 64MB HDD
$19.99
Western Digital Gold Enterprise 4TB,7200 RPM Internal Hard Disk Drive WD4002FYYZ
$39.95