Results 1 to 4 of 4

Thread: Captive NTFS on Knoppix 3.6 and WInXP / NTFS hard drive

  1. #1
    Junior Member
    Join Date
    Jan 2005
    Posts
    2

    Captive NTFS on Knoppix 3.6 and WInXP / NTFS hard drive

    Hello,

    I am using the Knoppix 3.6 cd and I would like to mount my C drive so I can copy
    files from there and maybe after finishing the work, copy the files back.

    I tried the command :

    mount -t ntfs /dev/hda1 /mnt/hda1

    but I get a message saying :

    /dev/hda1 is not a valid block device.

    I read through the forum and also searched the net and found that using captive NTFS can help,
    I started its wizard and it was scanning all the directories but it could not find any drivers for
    the NTFS - for ntfs.sys and ntoskrnl.exe, then after it finished the scan I saw the message :

    Detection of language localized MS-Windows drivers is missing.
    You may need to copy localized ntfs.sys and ntoskrnl.exe to /var/lib/captive by cp command.

    I clicked forward, then t suggested that I download a part of service pack 1 of
    Windows XP.

    I don't understand one thing and I would appreciate if someone can direct me in
    the right way - is there no NTFS driver installed in the Knoppix distribution itself ?
    do I have to get it from the outside, but then since I use only the cd and not a permanent hd install for Knoppix, how can I do this, any help will be appriciated !!!
    (also how can I save the knoppix settings so every time after I boot the cd I will be able to
    copy files from my C drive without doing this whole process again).

    Thanks

    Itay

  2. #2
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441

    Re: Captive NTFS on Knoppix 3.6 and WInXP / NTFS hard drive

    Quote Originally Posted by itaydagani
    I am using the Knoppix 3.6 cd and I would like to mount my C drive so I can copy
    files from there
    and maybe after finishing the work, copy the files back.
    Not spending a lot of time on what went wrong with the mount command, Knoppix should have a hda1 icon on the desktop that you can use to mount hda1 with read only and copy the files with.

    As to putting the files back, what type of partition is hda1? You should not write to an NTFS partition with Knoppix.

  3. #3
    Junior Member
    Join Date
    Jan 2005
    Posts
    2
    Thanks for your answer, I will check it, I have a disk on key, does Knoppix deal with these
    usb devices ?

    Thanks

    Itay

  4. #4
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by itaydagani
    Thanks for your answer, I will check it, I have a disk on key, does Knoppix deal with these
    usb devices ?...
    Some people have reported problems with some flash devices but most of us, including myself, have had no problems. Be sure it is plugged in when you boot and see if you don't get a desktop icon for it. You may have to use the right click feature and select "action..." to make it read/write, I think it will default to read only if you do not (like Knoppix hard drives). I haven't been able to get mine bootable yet (even though my notebook claims to be able to boot from USb devices), but that's a different issue.

Similar Threads

  1. Accessing hard drive (NTFS - Windows XP) from USB Knoppix??
    By tecnoL in forum MS Windows & New to Linux
    Replies: 3
    Last Post: 04-10-2007, 11:56 AM
  2. unable to write to NTFS with captive-ntfs
    By harry66 in forum General Support
    Replies: 1
    Last Post: 03-30-2005, 05:03 PM
  3. Replies: 8
    Last Post: 03-30-2005, 04:36 PM
  4. Replies: 0
    Last Post: 02-01-2005, 08:08 AM
  5. captive ntfs - mount ntfs (reade/write) through icon
    By terminator in forum General Support
    Replies: 0
    Last Post: 05-12-2004, 10:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W picture

H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W

$2512.18



CSE-118 Supermicro 1U 3x GPU Server  2.1Ghz 16-C 128GB CX353A 2x1600W PSU Rails picture

CSE-118 Supermicro 1U 3x GPU Server 2.1Ghz 16-C 128GB CX353A 2x1600W PSU Rails

$450.03



CSE-118 Supermicro 1U GPU Server 2.6Ghz 20-C 256GB 2x Nvidia K40 GPU 2x1600W PSU picture

CSE-118 Supermicro 1U GPU Server 2.6Ghz 20-C 256GB 2x Nvidia K40 GPU 2x1600W PSU

$674.03



Dell R730xd 12LFF 2.6Ghz 20-C 128GB H730 2x10G+2x1G NIC 2x1100W 12x Trays Rails picture

Dell R730xd 12LFF 2.6Ghz 20-C 128GB H730 2x10G+2x1G NIC 2x1100W 12x Trays Rails

$721.05



Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB picture

Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB

$510.00



DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45 picture

DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45

$275.00



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD

$389.99



SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount picture

SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount

$224.99



Dell PowerEdge R430 3.5 1U 2x E5-2690 v3 2.6ghz 24-Cores 256gb 4x Trays 2x 550w picture

Dell PowerEdge R430 3.5 1U 2x E5-2690 v3 2.6ghz 24-Cores 256gb 4x Trays 2x 550w

$289.99



HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45 picture

HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45

$355.00