Results 1 to 4 of 4

Thread: Captive NTFS on Knoppix 3.6 and WInXP / NTFS hard drive

  1. #1
    Junior Member
    Join Date
    Jan 2005
    Posts
    2

    Captive NTFS on Knoppix 3.6 and WInXP / NTFS hard drive

    Hello,

    I am using the Knoppix 3.6 cd and I would like to mount my C drive so I can copy
    files from there and maybe after finishing the work, copy the files back.

    I tried the command :

    mount -t ntfs /dev/hda1 /mnt/hda1

    but I get a message saying :

    /dev/hda1 is not a valid block device.

    I read through the forum and also searched the net and found that using captive NTFS can help,
    I started its wizard and it was scanning all the directories but it could not find any drivers for
    the NTFS - for ntfs.sys and ntoskrnl.exe, then after it finished the scan I saw the message :

    Detection of language localized MS-Windows drivers is missing.
    You may need to copy localized ntfs.sys and ntoskrnl.exe to /var/lib/captive by cp command.

    I clicked forward, then t suggested that I download a part of service pack 1 of
    Windows XP.

    I don't understand one thing and I would appreciate if someone can direct me in
    the right way - is there no NTFS driver installed in the Knoppix distribution itself ?
    do I have to get it from the outside, but then since I use only the cd and not a permanent hd install for Knoppix, how can I do this, any help will be appriciated !!!
    (also how can I save the knoppix settings so every time after I boot the cd I will be able to
    copy files from my C drive without doing this whole process again).

    Thanks

    Itay

  2. #2
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441

    Re: Captive NTFS on Knoppix 3.6 and WInXP / NTFS hard drive

    Quote Originally Posted by itaydagani
    I am using the Knoppix 3.6 cd and I would like to mount my C drive so I can copy
    files from there
    and maybe after finishing the work, copy the files back.
    Not spending a lot of time on what went wrong with the mount command, Knoppix should have a hda1 icon on the desktop that you can use to mount hda1 with read only and copy the files with.

    As to putting the files back, what type of partition is hda1? You should not write to an NTFS partition with Knoppix.

  3. #3
    Junior Member
    Join Date
    Jan 2005
    Posts
    2
    Thanks for your answer, I will check it, I have a disk on key, does Knoppix deal with these
    usb devices ?

    Thanks

    Itay

  4. #4
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by itaydagani
    Thanks for your answer, I will check it, I have a disk on key, does Knoppix deal with these
    usb devices ?...
    Some people have reported problems with some flash devices but most of us, including myself, have had no problems. Be sure it is plugged in when you boot and see if you don't get a desktop icon for it. You may have to use the right click feature and select "action..." to make it read/write, I think it will default to read only if you do not (like Knoppix hard drives). I haven't been able to get mine bootable yet (even though my notebook claims to be able to boot from USb devices), but that's a different issue.

Similar Threads

  1. Accessing hard drive (NTFS - Windows XP) from USB Knoppix??
    By tecnoL in forum MS Windows & New to Linux
    Replies: 3
    Last Post: 04-10-2007, 11:56 AM
  2. unable to write to NTFS with captive-ntfs
    By harry66 in forum General Support
    Replies: 1
    Last Post: 03-30-2005, 05:03 PM
  3. Replies: 8
    Last Post: 03-30-2005, 04:36 PM
  4. Replies: 0
    Last Post: 02-01-2005, 08:08 AM
  5. captive ntfs - mount ntfs (reade/write) through icon
    By terminator in forum General Support
    Replies: 0
    Last Post: 05-12-2004, 10:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


790097-001 HP 3.4Ghz Xeon E5-2643 V3 CPU Processor for Z840 Z640 Workstation picture

790097-001 HP 3.4Ghz Xeon E5-2643 V3 CPU Processor for Z840 Z640 Workstation

$111.49



Intel - Core i7-12700K Desktop Processor 12 (8P+4E) Cores up to 5.0 GHz Unloc... picture

Intel - Core i7-12700K Desktop Processor 12 (8P+4E) Cores up to 5.0 GHz Unloc...

$242.99



Intel Core i7-3770 3.40GHz Quad-Core CPU Processor SR0PK FCLGA1155 Socket picture

Intel Core i7-3770 3.40GHz Quad-Core CPU Processor SR0PK FCLGA1155 Socket

$29.95



Intel - Core i9-14900K 14th Gen 24-Core 32-Thread - 4.4GHz (6.0GHz Turbo) Soc... picture

Intel - Core i9-14900K 14th Gen 24-Core 32-Thread - 4.4GHz (6.0GHz Turbo) Soc...

$539.99



Intel SR2L6 Core i5-6500 3.2GHz 6th Gen LGA1151 Socket Quad-Core Processor picture

Intel SR2L6 Core i5-6500 3.2GHz 6th Gen LGA1151 Socket Quad-Core Processor

$24.59



Intel 6 Core i5-8600 3.1GHZ Desktop Processor SR3X0 picture

Intel 6 Core i5-8600 3.1GHZ Desktop Processor SR3X0

$50.00



Intel - Core i7-14700K 14th Gen 20-Core 28-Thread - 4.3GHz (5.6GHz Turbo) Soc... picture

Intel - Core i7-14700K 14th Gen 20-Core 28-Thread - 4.3GHz (5.6GHz Turbo) Soc...

$399.99



Intel Xeon E5-2690V2 3.00GHz 10-Core (SR1A5) Processor CPU READ DESCRIPTION picture

Intel Xeon E5-2690V2 3.00GHz 10-Core (SR1A5) Processor CPU READ DESCRIPTION

$12.00



AMD Ryzen 7 2700X CPU Processor 3.7GHz AM4 picture

AMD Ryzen 7 2700X CPU Processor 3.7GHz AM4

$74.99



Intel Core i9-13900K Raptor Lake 24-Core (8P+16E) Desktop Processor CPU picture

Intel Core i9-13900K Raptor Lake 24-Core (8P+16E) Desktop Processor CPU

$499.00