I had the same problem. Can you tell me if you got a response?Originally Posted by Krazy
It seems as though there are not many answers to questions posted here
OK guys, I am a linux newbie, so please forgive me if I sound like an idiot. I am using KNOPPIX v 3.1 (12-12-02) and can't access the internet. I have a netgear FA311 NIC with Linksys router/switch connected to cable modem. My system is a Shuttle AK32 motherboard with athalon 1.4 gig and 384mb ram. Everything else about KNOPPIX seems to work fine, just can't get on the net. any help would be appreciated. thank you!
I had the same problem. Can you tell me if you got a response?Originally Posted by Krazy
It seems as though there are not many answers to questions posted here
Can you ping your router? Did knoppix detect and configure your network card properly? You can get info about this by typing "ipconfig" from the command line. Cut and paste your results back here. Also try opening a root shell and run netcardconfig then follow the wizard.
the command should be " ifconfig "
I 'think' (am guessing) that your card uses the rtl8139too module, so try this as root from a terminal or console:
modprobe rtl8139too
if you don't get any errors that is the correct NIC driver module. then still at a command line type:
ifup eth0
then ifconfig and see if you have an eth0 entry.
HTH
rock
Good Lord I was slipping into windoze thinking for a moment. Thank you RockMumbles and sorry Krazy for the confusion!Originally Posted by RockMumbles
Try
/sbin/dhclient eth0
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$454.99
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$171.99
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$256.99
DELL PowerEdge R730 16SFF Server 2x E5-2680v4 2.4GHz =28 Cores 64GB H730 4xRJ45
$317.00
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
HP ProLiant DL360 G9 Server 2x E5-2690v3 2.60Ghz 24-Core 256GB P440ar
$302.90
Lenovo ThinkServer TS140 Xeon E3-1225v3 3.20GHz 16GB RAM Tower Server Needs HDD
$99.99
Cisco UCS C240 M4 2U Server w/ 2x E5-2680v4, NO RAM
$39.99
DELL PowerEdge R730 Server 2x E5-2697v4 2.3GHz =36 Cores 128GB H730 4xRJ45
$433.00
Dell Poweredge R730xd 2x E5-2660 v3 2.6ghz / 64gb / H730 / 24x Trays / 2x 750w
$344.99