ifconfigOriginally Posted by yoshi95
How do you connect to the internet? Do you have a Static I.P. address or DHCP?2) how do i find out what my broadcast address is?
i am booting knoppix 3.2...................everything goes well except there is not internet and sound..................
i have 2 network cards....1 is onboard VIA and the other is realtek PCI
so i went to the kde menu and clicked
knoppic -> network configuration -> network confifuration
2 network card popped up............ eth0, eth1.........i know one of them is my realtek just dont know which one....................so i entered my IP, subnet, DNS................but had no idea what my broadcast address is..........i entered the same info for both cards......none worked.........
here are my questions:
1) how do I find out which device (eth0, or eth1) is the realtek card?
2) how do i find out what my broadcast address is?
then there is the sound problem............
i read the previous posts.................but didnt find an anwser........
i have a SB live! value..................knippix detects the card upon booting from the cd room.......................but there is no sound when i tried playing some song in XMM...........the sound I/O is set on auto detect.......
i also did the sound configuration thing from the knoppix menu.........
the detection result was "5885 audioPCI card".......then it tried playin some sample file but i didnt hear a thing...............so i went to manual ............picked SB live........cant hear the sample still............picked SB AMU??...............no sound still..............
the system info from the kde menu tells me there is no info for the soundcard.................................so how do i fix this................?
thanks in advance......................
ifconfigOriginally Posted by yoshi95
How do you connect to the internet? Do you have a Static I.P. address or DHCP?2) how do i find out what my broadcast address is?
i have a static ip...........i think........cuz the internet doesnt work if i just plug it in in windows....i have to go set the ip and subnet and put in 3 dns numbers b4 it works..................so i think i have a static ip..................
In a shell type:Originally Posted by yoshi95
dmesg | grep eth
the broadcast adres is (AFAIK) your normal IP adres bitwise AND'ed with your netmask2) how do i find out what my broadcast address is?
so that means that is you have 192.168.1.45 for an IP adres, and 255.255.255.0 as your netmask, then your broadcast adres will become 192.168.1.255.
similarly, if your IP adres is 192.168.123.65 with netmask 255.255.0.0, then your broadcastadres will be 192.168.255.255
But you usually can just skip the broadcast adres, your computer will calculate it for you.
so i downloaded the new alsa from this link cuz my sound card wont work
http://www.linuxfaqs.de/knoppix/
and unzip and compiled and installed alsa..................
then i did knoppix->configuration->save configuration->save to floppy
and i reboot
in the boot commnad prompt i typed:
knoppix myconfig=scan
Enter
minutes later i have a filesystem error saying that /mnt/ is not found and ask me do i want to retry ( the floppy drive light is on) i typed 'y'....same error.....so i reboot and did this at the boot command prompt
knoppix myconfig=/mnt/floppy
still the same error.........filesystem error /mnt/floppy not found......or something
and then i did this
knoppix myconfig=/dev/mnt/floppy
same error................filesystem /mnt/mnt/floppy not found....
uh.....what da hell am i doin wrong guys?
thanks in advance
OK so you did netcardconfig at the command line right? If you have a static i.p then you should know what it is right?Originally Posted by yoshi95
The dns numbers are i.p. addresses of Domain Name Servers (they "resolve", or, link www.whatever.org to an i.p. address) and you would normally have a primary and a secondary. You've entered those in as well right?
Wirf is spot on about the broadcast address.
See if that does it.
Dell PowerEdge R640 Server | 2x Gold 6132 28 Cores | H730p | Choose RAM / DRIVES
$2630.00
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R730, 2 sinks, SystemBoard, 8 trays,H330,Idrac 8 exp, 2x750w Psu
$135.00
Dell Poweredge R730xd 2.5in 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$189.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x600Gb SAS, Proxmox
$340.00
DELL PowerEdge R730 16SFF Server 2x E5-2690v4 =28 Cores No RAM/ HDD H730 4xRJ45
$232.97
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
Dell R630 8 Port SFF Server 2x E5-2680v4 28C H730P 128GB 2x Trays RJ-45 ENT
$345.00