Hi everyone.
I recently installed knoppix 3.7 with 2.6.9 kernel on my hd, via knoppix-installer.
Everything was going well, until I had to compile a new kernel to provide support for a RAID controller. I downloaded the 2.6.10 vanilla kernel and an Alan Cox's patch to it.
Everything went well, after the compiling I found in /boot the /boot/vmlinuz-2.6.10 and /boot/initrd.img-2.6.10 files to boot with my new kernel
I modified lilo.conf as well and ran "lilo -v" to create the new item in the lilo boot screen.... BUT...
EVERYTIME I CHOOSE 2.6.10 THE SYSTEM LOADS THE 2.6.9 ONE!
What's happening???
Thx
--
cheesburger
LSI 9305-16i SATA SAS 12Gbs RAID Controller Host Bus Adapter PCIe 3.0 x8 IT-Mode
$199.99
XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT
$59.00
IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller Both brackets
$139.00
HPE 869102-001 Smart Array E208i-a SR Gen10 Storage Controller RAID SP: 871039
$116.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$87.99
LSI MegaRaid 9361-8i 12Gbps SAS / SATA Raid Controller PCIe x8 3.0 Tested
$29.00
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
Oracle 7332895 LSI MegaRAID 9361-16i 16-PORT 12GB SAS PCIE RAID CONTROLLER
$349.00