--There is a FAQ about setting up Knoppix CD as FTP server:
http://sourceforge.net/docman/displa...group_id=70773
--Here also is my info:
http://www.knoppix.net/forum/viewtopic.php?t=362
Originally Posted by little sumo
As i use Knoppix as a rescue cd for various pc's, i tried to transfert files with a parallel cable.
So ,i set up a plip connection betwenn 2 pc's, they could ping each other, but i would like to transfer files with scp or something like (better with a GUI)
Thanks
--There is a FAQ about setting up Knoppix CD as FTP server:
http://sourceforge.net/docman/displa...group_id=70773
--Here also is my info:
http://www.knoppix.net/forum/viewtopic.php?t=362
Originally Posted by little sumo
Thanks for your reply, but my ftp settings seem to be ok: when i try a ftp seesion with eth0, there is no problem.
Is there a config where i should say ftp, to lesson on plip0 instead of eth0?
Regards.
--Hmm... Sounds like a routing issue to me, and route commands are beyond my ken.
Originally Posted by little sumo
SAS - HGST Ultrastar 7K4000 HUS724040ALA640 0F14688 3.5" 4TB 7.2K RPM 64MB HDD
$19.99
Hitachi 4TB 3.5" Hard Drive HUS724040ALE640 Ultrastar 7K4000 Internal 7.2K
$49.95
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
WD 4TB Gold Enterprise - 7200 RPM SATA 6Gb/s 128MB CACHE 3.5" HDD - WD4002FYYZ
$42.95
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
1TB HDD/SSD 2.5" SATA Hard Drive with Windows 10 or Windows 11 Pro Installed
$18.99
Seagate Exos X20 18TB SATA 6Gb/s 3.5" Enterprise Hard Drive - ST18000NM003D
$168.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.33