-
3.1 to 3.2, burn problems, update
Hi
I have Knoppix 3.1 from c't on my harddisk, and I have done a apt-get update. Afterwards i got the message: 476 packages not updated. Whats wrong?
How can I persuade xcdroast to burn a cd? Do I have to be root? (NEC DVD and Plextor 12/10/32A IDE).
I have downloaded the english version of Knoppix 3.2. Can I do an update, ord should I erase hda5, where I have the c't 3.1, first?
Best regards
Finn Arne Hansen
-
Senior Member
registered user
I have done a apt-get update. Afterwards I got the message: 476 packages not updated. Whats wrong?
you probably did this:
apt-get update
apt-get upgrade
which will upgrade packages on your system that do not have library or other major dependency changes.
what do you get for an output if you: (for now just look at the output and answer "n" to upgrade question)
apt-get update
apt-get dist-upgrade
Note: the dist-upgrade will have problems because of KDE files being in different places or in multiple packages, so you will have to manually deal with about 6 to 8 kde packages if you do the dist-upgrade. Check out this thread before you decide to upgrade your system:
http://www.knoppix.net/forum/viewtopic.php?p=6423#6423
the only way to upgrade 3.1 to 3.2 would be to back up your settings in /etc and backup your /home and then manually copy files from a running 3.2 system to your 3.1 hd install and then be willing to fix any problems manually.
HTH
rock
-
Senior Member
registered user
Re: 3.1 to 3.2, burn problems, update
Originally Posted by
fina
How can I persuade xcdroast to burn a cd? Do I have to be root? (NEC DVD and Plextor 12/10/32A IDE).
Best regards
Finn Arne Hansen
I believe you'd do better to have only one subject per post.
If you're installing 3.2 I don't believe it has xcdroast-you could of course install it. 3.2 does however have k3b. While I have made both of those programs function I couldn't recommend them. If you're going to take the time & trouble to learn, configure and setup cd burning software why not put that same effort into learning to use cdrecord, cdparanoia, and mkisofs from the command line? They really aren't that hard to use and once you learn them you've got it. Afterall whether you use k3b, xcdroast, gcombust or what have you they are only frontends for the afore mentioned programs right?
Similar Threads
-
By indocafe in forum General Support
Replies: 2
Last Post: 08-23-2004, 06:57 PM
-
By Mustang64 in forum General Support
Replies: 8
Last Post: 05-26-2004, 03:31 AM
-
By aay in forum General Support
Replies: 3
Last Post: 04-05-2004, 03:01 PM
-
By gonefishing in forum General Support
Replies: 1
Last Post: 01-01-2004, 08:57 PM
-
By eporue in forum Hardware & Booting
Replies: 0
Last Post: 01-31-2003, 06:05 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge VRTX Rack Chassis 25-Bay 14.4TB HDD 2x M640 Blade 512GB RAM 2-Bay
$2335.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99