Try a 'modprobe tulip'
I have not personally had success with this command, but I know it is related to starting network interface modules in the kernel.
I booted to knoppix in failsafe mode because some hardware issue was keeping me from booting normally. Since i'm in safe mode my pcmcia network card isn't working.
ifconfig -a gives me
lo Link encap:local loopback
inet addr:127.0.0..1 ,ask 255.255.255.0
and no eth0
ifconfig eth0 says eth0 : error fetching interface info: device not found.
can someone help me configure/setup this pcmcia wired network card. or point me to some docs that might help
\thanks
Try a 'modprobe tulip'
I have not personally had success with this command, but I know it is related to starting network interface modules in the kernel.
Samsung Galaxy Tab A9 (X110) 64GB 4GB RAM International Version (New)
$129.99
Samsung Galaxy Tab A8 10.5" 64GB Gray WiFi Tab SM-X200NZAZXAR 2022 Model Bundle
$130.00
Samsung Galaxy Tab A 8" SM-T387V 32GB Verizon Tablet (No SIM Tray) Grade B
$31.99
Samsung Chromebook 2 503C XE503C12-K01US (Octa 5420 1.9GHz - 4GB RAM - 16GB SSD)
$17.92
Samsung XE310XBA Chromebook 4 11.6" w/Celeron 1.1GHz/4GB/16GB SSD - Used
$38.00
NEW Samsung Galaxy Tab A8 10.5-in 32GB Tablet - Gray SM-X200
$129.98
Samsung Chromebook Computer 11.6" Celeron 2GB 16GB SSD WiFi Webcam Bluetooth
$44.99
Samsung Galaxy Tab A 8" SM-T387V 32GB Verizon WIFI + Cellular Grade A Condition
$54.99
Samsung Galaxy Tab S9 FE SM-X518U 128GB, Wi-Fi+5G (Carrier Unlocked) 10.9"- Gray
$409.98
Samsung Galaxy Tab A8 - SM-X200 - 32GB - Wi-Fi 10.5" Gray - EXCELLENT Condition
$109.95