Do you have the required RAM and swap space (1 GB or more)? If yes, had you forgot to enable swap space before starting compression?Originally Posted by Saint0453
Check and reply..
What I am trying to do is add the mmls program to Knoppix 3.7
I was following the Knoppix customising instructions at:
http://www.knoppix.net/wiki/Knoppix_Remastering_Howto
I removed the Open office package and then copied the mmls file into the knx\source\KNOPPIX\bin directory.
I was at the following step:
Now we'll make the big KNOPPIX file which is a cloop compressed ISO 9660 filesystem : mkisofs -R -U -V "KNOPPIX.net filesystem" -publisher "KNOPPIX www.knoppix.net" -hide-rr-moved -cache-inodes -no-bak -pad /mnt/hda1/knx/source/KNOPPIX | nice -5 /usr/bin/create_compressed_fs - 65536 > /mnt/hda1/knx/master/KNOPPIX/KNOPPIX
I get to:
[ 9] Block # 24577 size 65536 -> 8287 [compression ratio 12% overall 37%]
Killed
Does anyone know why the build is killing itself and stopping (I have tried it twice)? Is there a better meathod to add the mmls function (the file is only ~200 k).
Thanks.
-Saint
Do you have the required RAM and swap space (1 GB or more)? If yes, had you forgot to enable swap space before starting compression?Originally Posted by Saint0453
Check and reply..
No my machine only has 256 MB of RAM. For that reason I input (from the instructions):
cd /mnt/hda1/knx ; dd if=/dev/zero of=swapfile bs=1M count=750 ; mkswap swapfile ; swapon swapfile
I figured that command would give me the swapspace I needed. Do I have to enable that someway?
Thanks.
No it is fine. It is giving you the required swap space. But I recommend you to have swap of 1GB i.e. change the count=750 to 1000 in the command and retry. I faced similar problem once but the reason was that I hadn't enabled enough swap space.
Tell the results.
Thank you so much. That worked, guess didn't have enough swap space.
Thanks again.
-Saint
---------------------------------------------------------------------------------------------------------------------------------------
Do you know if there is a way to remove the checksum from the knoppix cd? (I have seen numerous post about this but no respose).
Why I ask is because:
I am trying to use Magic ISO (http://www.magiciso.com/) to create a tripple dual boot Helix, DOS and KNOPPIX CD/DVD. So I can boot either Helix or KNOPPIX or Snapback/Ghost in DOS.
When I Setup the dual boot and try to boot to Helix I get the following error: (I assume KNOPPIX would be the same, thus far I have only tried a dual boot CD using DOS and Helix)
"ISOLINUX 2.04 (Debian, 2003-06-06) isolinux:
Image checksum error, sorry..."
All the files from the original ISO image are present on the CD the only thing that has changed is the dual boot option.
Is there a way to remove the checksum that occurs at boot?
Thanks.
(Would it be better for me to start a new topic for this subject?)
All you have to need is to remove the md5sums file from the source of CDROM (I guess you are using original FAQ of remastering then this directory will be "knx/master") and then don't type the command that updates the checksums i.e. rm -f KNOPPIX/md5sums; find ...... something like this. Only give the command starting with "mkisofs" to create the iso.Originally Posted by Saint0453
Tell the progress.
So i went from the step where you make the big KNOPPIX file. then i did:Originally Posted by raj1478
cd /mnt/hda1/knx/master
I skipped the step:
rm -f KNOPPIX/md5sums; find -type f -not-name md5sums -not -name boot.cat -not -name isolinux.bin -exec md5sum '{}' \; >> KNOPPIX/md5sums
I then went to the step:
mkisofs -pad -l -r -J -v -V "KNOPPIX" -no-emul-boot -boot-load-size 4 -boot-info-table -b boot/isolinux/isolinux.bin -c boot/isolinux/boot.cat -hide-rr-moved -o /mnt/hda1/knx/knoppix.iso /mnt/hda1/knx/master
At this piont i get the error:
mkisofs: Uh oh, I cant find the boot image 'boot/isolinux.bin' !
Any suggestions on how to include this but not the chucksum?
Thanks.
The command looks OK.
Check if there is a boot directory in the master with isolinux directory.
If yes, have you really given the command "cd /mnt/hda1/knx/master".
Is your remaster really on "hda1" partition or somewhere else...?
Update me...
I checked and there is a boot directory in the master with a directory isolinux inside of it. Inside of the isolinux direcotry there is a file: isolinux.binOriginally Posted by raj1478
I re-entered the command just to be sure and yes I am in the /mnt/hda1/knx/master directory.Originally Posted by raj1478
Techincally no, my remaster is on hda2 but starting from the begining of the "Remastering Howto" I changed:Originally Posted by raj1478
mount -rw /dev/hda1 /mnt/hda1 to mount -rw /dev/hda2 /mnt/test
Throughout the instructions anywhere I saw a "hda1" I changed this to a "test" (the mount point for hda2).
Should there not be a boot directory in the /knx/master directory?
Thanks.
The commands look OK. But the problem with the mkisofs command, which itself is reporting, that it can't find boot file "boot/isolinux.bin". So, the only possibility I can think out is a typing mistake or the file isolinux.bin may be corrupt. Try to replace boot directory with the boot directory of original CD and tell the progresss.
HP ProLiant DL380 Gen9 8SFF Server - E5-2698 v3 - 32Cores - 128GB Ram - 1TB HDD
$299.00
Gigabyte 2U Server 2x Xeon E5-2680 v4 / 128gb Ram / 12x 3.5" 12G / 9362-8i Ra...
$449.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
Dell R730xd 26 Port SFF 2x E5-2697v4 36-Cores H730 128GB Server 2x SFP 10G ENT
$490.00
Dell PowerEdge R620 Dual Intel Xeon E5-2697 v2 @2.70GHz 128GB RAM No HDD S110
$144.50
Dell R630 Server 2x E5-2620 V4 2.1GHz =16 Cores 128GB DDR4 1x 960GB 2x 1G 2x 10G
$345.00
2x 14TB SAS Toshiba 3.5" 12Gbps wi/ LSI 9361-8i and 2x SAS3 - SAS3 Cable
$95.92
DELL R440 8-Bay Server with 2x Bronze 3104 CPU, 2x PSU H330 Raid | No Ram, HD
$359.00
HP ProLiant DL380 Gen9 Server 1x Xeon E5-2620V3 2.40 GHz 16 GB RAM No OS No HDD
$114.95
Lenovo ThinkSystem ST50 V2 Tower Server Intel Xeon E-2324G 3.10 GHz 16 GB RAM
$774.99