-
Originally Posted by
Saint0453
I receive the following error:
No-Emulation type image (raw)
0000080000000001
ISO linux 2.04 (debian, 2003-06-05) isolinux: Image checksum error, sorry...
From this error it appears that you need to make the knoppix CD bootable.
The cheksum is being called by (I think the isolinux file).
I'm sorry. The step of boot.img will not work because it is based on 3.3 experience. You need to copy the boot directory (I think it is so in 3.7) and don't modify the iso from ISO-magice. Look for configuration file of "isolinux.bin" program to see if there is an option of cheksum verification.
Update with progress..
-
Junior Member
registered user
[quote="raj1478"]
Originally Posted by
Saint0453
Look for configuration file of "isolinux.bin" program to see if there is an option of cheksum verification.
Update with progress..
I looked in the folder: master/boot/isolinux
There was a file: isolinux.cfg and isolinux.bin
I looked through the isolinux.cfg file and did not find anything in reference to "checksum" or "md5".
I also preformed the following command on the isolinux folder.
grep md5 *.*
grep md5 checksum *.*
There were no results for the md5 and the only result for the checksum search was the isolinux.bin file.
Do you have any other idea where this configuration file might be located?
Thanks
-
Problems with remaster 3.7 - Dont boot properly!
I'm having a problem with my remaster. The case is this:
I followed this how to http://www.knoppix.net/wiki/Knoppix_Remastering_Howto
My Knoppix version is 3.7, and Iīm booting from kernel 2.6 to build my image.
The image is created normally but when i boot the new image, the boot process stop with the message that system was unable to find the filesystem. The prompt is limited and I canīt do anything.
Can someone help-me ???
-
Problems with remaster 3.7 - Dont boot properly!
I'm having a problem with my remaster. The case is this:
I followed this how to http://www.knoppix.net/wiki/Knoppix_Remastering_Howto
My Knoppix version is 3.7, and Iīm booting from kernel 2.6 to build my image.
The image is created normally but when i boot the new image, the boot process stop with the message that system was unable to find the filesystem. The prompt is limited and I canīt do anything.
Can someone help-me ???
-
Re: Problems with remaster 3.7 - Dont boot properly!
Originally Posted by
molina
The image is created normally but when i boot the new image, the boot process stop with the message that system was unable to find the filesystem. The prompt is limited and I canīt do anything.
Can someone help-me ???
Have you changed the name of KNOPPIX filesystem to anythiing else? If yes then this is the problem. If not, can you post the command you gave to make the compressed filesystem?
-
I found the problem
Hello!
Iīve found the problem thatīs causing the boot proccess to abort. I was using VMWare to make my remaster. The problem was with the virtual SCSI disk of the VMWare. When I change from virtual SCSI to virtual IDE disk the proccess was successfull.
Thanks to all!!!
Similar Threads
-
By Sergey.Khlutchin in forum Customising & Remastering
Replies: 4
Last Post: 06-15-2005, 05:17 PM
-
By ktheking in forum Customising & Remastering
Replies: 0
Last Post: 06-08-2004, 09:15 PM
-
By TyphoonMentat in forum The Lounge
Replies: 0
Last Post: 03-07-2004, 10:41 PM
-
By Arbiter in forum Customising & Remastering
Replies: 7
Last Post: 01-07-2004, 05:42 PM
-
By mpj in forum Customising & Remastering
Replies: 0
Last Post: 03-29-2003, 07:52 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 512GB | H730P | 8x HDD Trays
$2549.00
Dell R730xd 12LFF 2.6Ghz 20-C 128GB H730 2x10G+2x1G NIC 2x1100W 12x Trays Rails
$721.05
Dell Poweredge R640 Server | 2x Silver 4114 20 Cores | 64GB | 8x HDD Trays
$1614.99
Dell Poweredge R640 Server | 2x Silver 4114 20 Cores | 16GB | 2x HDD Trays
$1349.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45
$353.00