No. Knoppix locks the partition the tohd is installed on.Originally Posted by Nick889
Ok, I'll give as much detail upfront.
I have 1 partition with win98 on it and wanted to be able to explore knoppix without messing with other partitions and get all messy and stuff. So I used the tohd command and I did the following..
tohd=/dev/hda1
it worked as expected and booted correctly. However.... I can not change the read/write permission on the hda1 disk. Everytime I right click and select "Actions" then select "Change read/write mode" I get an error about how the drive is already being accessed and it can not change it. This of course is because I am booting from it.
Is their anyway I can change this so that I can write to the same drive I did my tohd command on? I tried changing the setting when booting from cd and it works just fine. I saved my config and did "knoppix myconfig=/mnt/hda1" at the boot prompt and all my configuration options load normal when i use "fromhd=/dev/hda1" EXCEPT for that the drive still isn't writable.
What can I do? Any knoppix guru's want to help a newbie?
No. Knoppix locks the partition the tohd is installed on.Originally Posted by Nick889
Here is a case where a partition pointed-at by fromhd= and home= is writeable:Originally Posted by CrashedAgain
http://www.knoppix.net/wiki/Hd_Based...ing_GRUB_on_HD
Dell R730 w/ 2x E5-2650v3 10c, 192GB (12x16GB) RAM, H730 Mini, 2x 750W PSU
$349.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
$209.99
$599.99
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45
$353.00