Please try
knoppix nopcmcia ide2=0x180,0x386
at the boot prompt. I tested it with Sony Vaio notebooks with external PCMCIA CD drive.
trying to install knoppix on an old laptop (ACER Extensa 355 ) , it only has a floppy drive and a PCMCIA ( I thnk it's TI 1131 Cardbus controller ) cd-rom errors i get are :
cannot allocate resource region 1 of device 00:0c.0
then the welcome too knoppix line, then :
dropping to (very limited shell) ...etc
when i try mount it reports :
FAT: bogus logical sector size 5120
FAT: bogus logical sector size 5120
Kernel Panic:VFS: unable to mount root fs on 01:01
any ideas (other than smartass 'buy a new laptop' :op )
Please try
knoppix nopcmcia ide2=0x180,0x386
at the boot prompt. I tested it with Sony Vaio notebooks with external PCMCIA CD drive.
no joy :o(
same errors, no change at all
You could try booting in "expert" mode, it will ask you what should be loaded. I guess you will be asked some linux "inside" questions too, so...Originally Posted by Yakumo
...Could be helpfull, could be not.
You did press F2 to enter the cheatcodes I hope?
Cisco GLC-FE-100LX 100BASE-LX SFP Transceiver Module
$15.59
Cisco GLC-FE-100LX-RGD 100BASE-LX SFP Transceiver Module
$17.99
Cisco w/ Green Hologram SFP-25G-SR-S 25G SFP28 SR 850nm 100m LC MMF
$68.99
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Genuine Cisco GLC-TE 30-1475-01 V01 1000BASE-T SFP COPPER RJ-45 100M TRANSCEIVER
$11.90
10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module
$85.00
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00