Please try
knoppix nopcmcia ide2=0x180,0x386
at the boot prompt. I tested it with Sony Vaio notebooks with external PCMCIA CD drive.
trying to install knoppix on an old laptop (ACER Extensa 355 ) , it only has a floppy drive and a PCMCIA ( I thnk it's TI 1131 Cardbus controller ) cd-rom errors i get are :
cannot allocate resource region 1 of device 00:0c.0
then the welcome too knoppix line, then :
dropping to (very limited shell) ...etc
when i try mount it reports :
FAT: bogus logical sector size 5120
FAT: bogus logical sector size 5120
Kernel Panic:VFS: unable to mount root fs on 01:01
any ideas (other than smartass 'buy a new laptop' :op )
Please try
knoppix nopcmcia ide2=0x180,0x386
at the boot prompt. I tested it with Sony Vaio notebooks with external PCMCIA CD drive.
no joy :o(
same errors, no change at all
You could try booting in "expert" mode, it will ask you what should be loaded. I guess you will be asked some linux "inside" questions too, so...Originally Posted by Yakumo
...Could be helpfull, could be not.
You did press F2 to enter the cheatcodes I hope?
Cisco Catalyst 48-Port Manage Gigabit Switch w/ 2x 10G SFP+ WS-C2960S-48FPD-L
$59.99
NEW Cisco C9300-48P-A 48 Port Gigabit POE+ Switch with module C9300-NM-8X
$2999.00
Cisco QSFP-100G-LR4-S 100GBASE-LR4 QSFP28, 1310nm, 10km, LC, SMF
$335.99
Cisco Catalyst 3650 48-Port Managed PoE+ Gigabit Switch WS-C3650-48FS-E
$55.99
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod
$83.00
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$38.99
Cisco QSFP-40G-SR-BD BiDi Short-reach Transceiver, 1 Year Warranty
$17.25
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
Cisco Catalyst 3850 WS-C3850-48U-S 48-Port UPOE Gb Switch w/ NM-2-10G (BH)
$134.96
Cisco C9300-48 48 Port Switch Dual PSU W/C9300-NM-8X P/N: C9300-48U-A Tested
$799.99