-
Is it essential for Knoppix to be first partition?
The HD Install HOWTO says "Be sure the root partition is the first partition on the drive, is formatted with ext2 or ext3." Is this correct? It makes dual installations with WinXP impossible, because WinXP must be in the first partition.
Other Linux flavours such as SuSE are happy to be installed in extended partitions, i.e, the second or higher partition on the drive.
I would like to move from
hda1 WinXP system FAT
hda5 Data FAT
hda6 Data FAT
to
hda1 WinXP system FAT
hda5 Data FAT
hda6 Knoppix system ext2
hda7 Knoppix swap swp
Is there something specific to Knoppix or knoppix-installer (or the related partitioning package) that prevents me from doing this?
-
The HD Install HOWTO says "Be sure the root partition is the first partition on the drive, is formatted with ext2 or ext3." Is this correct?
No, that surely isn't true. Here's my setup:
Code:
root@charlie:~# fdisk -l /dev/hda
Disk /dev/hda: 9042 MB, 9042001920 bytes
255 heads, 63 sectors/track, 1099 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 382 3068383+ b W95 FAT32
/dev/hda2 383 446 514080 82 Linux swap
/dev/hda3 447 1099 5245222+ 83 Linux
I don't know, but it was probably correct when that WiKi entry was written? (It mentions Knoppix 3.4...)
-
Senior Member
registered user
NOTE: Be sure the root partition is the first partition on the drive, is formatted with ext2 or ext3, and is set to "active."
Kyle Rankin's excellent book, Knoppix Hacks (which includes 3.4 on disk), shows a swap partition on hdb1 and the rest of the system on hdb2.
In general no Linux even needs to be in a primary partition, never mind the first one on the first hard drive, as Windows demands. (Bootloaders can fool Windows by hiding partitions, if need be.)
As I write this I'm running Knoppix 3.7 with hda5 for swap, hda6 for /home, and hda7 for everything else. And I have more Linuxes farther on down the line (which share the swap and /home partitions with Knoppix).
Put it where you want it and have fun!
-- Ed
-
Many thanks for the swift and informative replies!
Similar Threads
-
By jwg in forum Hardware & Booting
Replies: 2
Last Post: 02-25-2007, 03:34 PM
-
By dmiceman in forum Klik
Replies: 2
Last Post: 09-18-2005, 08:11 PM
-
By bono in forum MS Windows & New to Linux
Replies: 5
Last Post: 08-08-2005, 08:10 AM
-
By randika in forum Customising & Remastering
Replies: 2
Last Post: 02-28-2005, 06:13 AM
-
By law_student in forum Customising & Remastering
Replies: 12
Last Post: 06-16-2003, 11:52 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
ATTO R608 8-Port 6Gb/s SAS RAID Controller
$33.99
Dell UCSA-901 0101A6100-000-G SAS PCI-E Raid Controller Card
$37.50
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
Dell PowerEdge RAID Controller HBA330 12Gbs PCIe 3.0 SAS SATA J7TNV Low Profile
$29.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$87.99
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
Oracle 7332895 LSI MegaRAID 9361-16i 16-PORT 12GB SAS PCIE RAID CONTROLLER
$349.00