Results 1 to 4 of 4

Thread: Quantian clustering

  1. #1
    Junior Member
    Join Date
    Nov 2004
    Posts
    3

    Quantian clustering

    Not sure if this is the right forum for this but I'll give it a shot and prepare to be moved

    So I am building a fairly large cluster (~60 node) for the quantum computing lab at my school... and I was hoping to get some help with some of the configurations that I am struggling with... The requirements for the cluster are: 1) the IPs for the nodes are statically assigned based on MAC... 2) the DVD be copied to the HD and used to boot the nodes (this should be easy but for some reason I am struggling with it)... 3) the hard drive should be shared over the network so that work done on the cluster can be stored there and accessed via SSH... any thoughts would be most appreciated and thanks in advance =)

    PS... well, it looks like fixed mapping is achieved via the PXE config on the server... editting the /etc/dhcpd.conf file... but openmosix overwrites this file when it starts... intriguing problems...

  2. #2
    Senior Member registered user
    Join Date
    Jan 2004
    Location
    Western MA.
    Posts
    111
    Do search for ClusterKnoppix, Quantain is based on it.
    1. I have come to the same conclusion about the dhcp being overwritten. It seems like a good way to bind the MAC to a IP address for a diskless node. I am currently booting nodes from a short script. It uses etherwake+MAC and sleep command to boot the nodes in a timed orderly fashion. Along with the Terminal server allocating ip address in a decending manner. Default ip is 192.168.0.200, next 192.168.0.199, ect. It works by giving the same IP to the same MAC address. It's not great but it works. I have also have had NFS mount get "swamped" by to many nodes booting at once. Some of the nodes will wind up as zombies...
    I also shut them down with a script. To boot again correctly, they need to be powered down to a "warm" state. The command that works for me is "ssh NODE halt -p -d -i -f"
    2. Many have struggled with a hard drive install. There is an * missing from the Knoppix-terminalopenmosix script. Search this forum for a more detailed answer.
    3. I was able to shorten the node boot times considerably :
    "gethostip 192.168.0.200"
    C0A800C8
    create a file with this name and copy the pxelinux.default to it. Place it in the pxelinux directory. Now the node wont nibble slowly away at the ip address it skips straight to default. While this is good it dosent bind it to a MAC address as far as I can tell.
    johnb

  3. #3
    Junior Member
    Join Date
    Nov 2004
    Posts
    3
    thank you for the ideas =)
    i switched the cluster over to clusterKnoppix since it really doesn't matter... I was able to get the HD to hold the boot image for the nodes... and I am intrigued by the idea of powering them on in order like you mentioned... what sort of script was it (if you don't mind sharing) that enabled you to do that?
    I also am a bit confused about the procedure to shorten boot time... I understand what you are getting at with the creating of a file so the node doesn't try to trim away at the address... is the file name just those 8 characters? thank you again for your help
    -david

  4. #4
    Senior Member registered user
    Join Date
    Jan 2004
    Location
    Western MA.
    Posts
    111
    I will post a pretty good how-to soon.
    sorry my time is short at the moment
    johnb

Similar Threads

  1. How About QUANTIAN?
    By A. Jorge Garcia in forum Other Live CDs
    Replies: 1
    Last Post: 06-19-2007, 06:29 PM
  2. Clustering?
    By dvryknopper in forum The Lounge
    Replies: 3
    Last Post: 05-15-2006, 02:23 AM
  3. HD Install and Clustering...
    By Kermit42 in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 03-02-2005, 01:38 PM
  4. Clustering Help
    By aznchowboy650 in forum General Support
    Replies: 5
    Last Post: 01-19-2005, 01:34 AM
  5. Quantian: A Knoppix remastering for Scientific Computing
    By edd in forum Customising & Remastering
    Replies: 11
    Last Post: 05-01-2004, 01:38 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24 picture

Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24

$117.00



GENUINE CISCO DS-SFP-FC32G-SW SFP NEW SEALED SEE PHOTOS SHIPS FREE picture

GENUINE CISCO DS-SFP-FC32G-SW SFP NEW SEALED SEE PHOTOS SHIPS FREE

$74.99



H3C SFP-FE-T-A Compatible 100BASE-T SFP Copper RJ-45 100m -93651 picture

H3C SFP-FE-T-A Compatible 100BASE-T SFP Copper RJ-45 100m -93651

$38.00



Sonicwall 02-SSC-1874 Compatible 10GBASE-T Copper SFP+ RJ-45 30M Transceiver-876 picture

Sonicwall 02-SSC-1874 Compatible 10GBASE-T Copper SFP+ RJ-45 30M Transceiver-876

$189.05



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.00



For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Module 10G SFP+ to RJ45 10GBase-T picture

For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Module 10G SFP+ to RJ45 10GBase-T

$48.59



NEW Sealed Cisco SFP-10G-SR-S 10G SR SFP+ Module 850nmMM *US Shipping* picture

NEW Sealed Cisco SFP-10G-SR-S 10G SR SFP+ Module 850nmMM *US Shipping*

$15.00



FS SFP-10G-T, 10GBASE-T SFP+ Copper RJ-45 30m Transceiver Module  picture

FS SFP-10G-T, 10GBASE-T SFP+ Copper RJ-45 30m Transceiver Module

$50.00



LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module picture

LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module

$89.00



NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*

$18.00