http://purelinux.hollosite.com/savedataknoppix.txt
thats the basics of it.
did you do sudo fdisk ?
Hey Guys,
Heres the complete story:![]()
Lost Windows OS due to "sys.ini" file corruption(source unknown). Had to re-install Win ME on primary HD (a Maxtor 10GB) from the "Restore'/Recovery" CD. Had a secondary HD (a WD Caviar 40GB) already installed at the time of the system "restore".
PROBLEM: All partition & file data on the secondary HD (the WD 40GB) seems to be "lost" gone.
QUESTION 1: Is the data really gone or is just the registry & partition data changed due to the "restore"???????????????.
These are the data recovery steps attempted so far:
1) used FDISK to check the partition info on the WD HD>>> no partition info listed.
2) used Western Digital's "Data LifeGuard Diagnostics" program to check >>> no partition info listed.
3) used "PC File Recovery" program to scan the WD HD for data files >>> found 700+ files which it can't read.
QUESTION 2: How can I use KNOPPIX to access/read/write/ & recover the data ???????????
Have Knoppix on disk & it boots up perfectly (many thanks!!).
Have read "greenfly's" info on using the GPART program but am not sure exactly how to implement/use it (eg. where & when to type the command line info etc.) and/or what other steps are needed to recover data.
Any help appreciated
Thanks in advance
RGPHNX
PS- I know this info is here somewhere- have searched >>> "Data recovery" & other terms in the forums >>
gives thousands of posts. Have read for hours but can't narrow this down even with filtered searches. I'm not lazy, just need good sound info help.
http://purelinux.hollosite.com/savedataknoppix.txt
thats the basics of it.
did you do sudo fdisk ?
Hi Pureone,
Thanks for the link. Read it.
Question: How do I see the data (using Knoppix GUI) in the first place?? So I can save it!! (Have lots of experience in DOS[batch files etc.] but am a total Knoppix noobe.)
Don't know what "sudo fdisk" is. Do I need to use it first ?? & if so how???
I used the standard FDISK program on the Win ME boot disk to view the HD info.
Please advise.
RGPHNX
sudo fdisk -l is the command you enter in a console to show infomation about the harddrive.
as for seeing data thats rather easy you just click the icon with a harddrive on it to mount c:\ (hda1 in linux) and you will see all your data.
i will add more details to that text file later on. im guessing i left out too much stuff for most new comers to linux.
Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W
$329.99
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$509.99
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
DELL PowerEdge R730XD Server 2x E5-2680v3 2.5GHz =24 Cores 32GB H730 4xRJ45
$271.00
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$174.95
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 256GB H730 4xRJ45
$562.00