-
Senior Member
registered user
Re: Knx. 3.2: partition naming
![Quote](images/misc/quote_icon.png)
Originally Posted by
chada
Then typed: "sudo mkfs /dev/hda7". Reply began: "mke2fs 1.32 (09-Nov-2002)", and then rolled out another 17 lines. Now I think for sure the filesystem is created on hda7.
Next, wishing to convert filesystemto ext3, typed: "sudo tunefs -j /dev/hda7". Reply:
"sudo: tunefs: command not found"
What next, o kind and patient one ?
Chada
The file system is created (ext2) so if you want to you could move the /home now and do the tunefs after you re-boot.
-
Junior Member
registered user
Knx. 3.2: partition naming
Thanks, Rock, for your advice (April 11, 5.47PM)
Booted Knx. CD; in console typed:
"sudo tune2fs -j /dev/hda7". Reply was about 4 lines which said nothing about ext3, so I swore for a while.
I then exited the CD, then booted the HDrive, opened cfdisk, and the filetype showing for hda7 was ext3 !
Jubilation ! That's for sure, right ?
-----------------------------------------
Think tomorrow, following Stephen's advice already given, I can get /home to move to hda7.
Thanks again,
Chada
-
Senior Member
registered user
The four lines were telling you that it was creating the journal for the ext3 filesystem. You should have it beat now. Good luck.
-
Junior Member
registered user
Knx. 3.2: partition naming
Thought we were in the home stretch, but.....
From what I can see, hda7 is in order: created and mounted.
If cfdisk shows ext3 against hda7, can I take that as proven? Is there another way to check?
Following Stephen's answer to my question #4, to move /home to hda7, assuming that hda7 is all in order, I booted the CD and in console,
typed: "sudo mount /dev/hda7 /mnt/hda7". Reply:
there was no comment; a new prompt came up; took that to mean "hda7 is mounted arready!"
Then typed:"cd /mnt/hda7/home". Reply: "No such file or directory"
Stuck again....suggestion please ?
Chada
-
Senior Member
registered user
Now you have to move the old home directory to the /mnt/hda7 and change the /etc/fstab.
sudo mount /dev/hda6 /mnt/hda6 - orginal home partition
sudo mount /dev/hda7 /mnt/hda7 - new home partition
cd /mnt/hda6/home - change to original home
sudo cp -Rp * /mnt/hda7/ - copy original home to new
then add the line to /etc/fstab:
/dev/hda7 /home ext3 rw,auto,user,exec 0 0
save the file and re-boot and you have now copied the /home to hda7 and it will be used on boot as /home.
The hda7 was mounted and you had the error because you have not moved the /home yet.
To add the line to /etc/fstab:
sudo vi /mnt/hda6/etc/fstab - open the fstab for editing.
insert - hit insert key to put vi in insert mode.
arrow down - use arrow down key to move down the file.
enter - hit enter key to create new open line.
type in the fstab line above.
esc - hit esc key to take vi back to command mode.
shift : - use the shift colon key to execute command you will see a : at bottom of screen.
x! - type x the shift + 1 to for !. The command will look like : x! at bottom of screen
enter - hit the enter key which will save the file without asking for conformation.
re-boot.
-
Junior Member
registered user
Knx. 3.2: partition naming
Further to Stephen's of April 12th, 6:45 pm
---------------------------------------------------
I am pleased, really PLEASED (!) to report that I followed this perfect little guide with full success.
Only one small glitch now remains. During Knx. original install, I set up swap in hda11. And it still appears so in fstab, even though I have now rewritten my partition schedule in cfdisk: Win2k, boot, root, home & swap (hda1,5,6,7 &
.
How do I correct this, please ?
Chada
-
Junior Member
registered user
Knx. 3.2 partition renaming
In my last, please re3ad the number 8 in place of the smiley.
chada
-
Senior Member
registered user
Edit the fstab again and change the 11 to 8 and re-boot and the swap will be used as long as you made hda8 as type swap when you used cfdisk.
-
Junior Member
registered user
Knx. 3.2: partition naming
Stephen's last advice (16 Apr. 4:10 AM) worked 4 me.
So ! Now everything (partitions, directory locations, & fstab) is in order.
I have many setup chores yet to do, but this process has given me a lot of confidence that I may actually make it to the finish line
For a lot of patience and careful, clear advice, to Stephen, the Rickenbacherus, & RockMumbles: thanks a lot !
Heil Knopper !
Chada
-
Senior Member
registered user
Good to hear you got it done.
Similar Threads
-
By marshalx in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 12-09-2004, 09:38 AM
-
By Quite in forum General Support
Replies: 5
Last Post: 09-23-2004, 01:36 AM
-
By Quite in forum General Support
Replies: 12
Last Post: 08-22-2004, 10:40 PM
-
By rrfish72 in forum General Support
Replies: 12
Last Post: 08-05-2004, 07:09 AM
-
By rossnixon in forum General Support
Replies: 10
Last Post: 02-08-2004, 01:32 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD picture](/store/img/g/vx0AAOSwvwFlExVY/s-l225/Dell-PowerEdge-R630-Server-2x-E5-2680-V4-28-Cores-.jpg)
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
![Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays picture](/store/img/g/GAcAAOSw9Q1mGSZW/s-l225/Dell-Poweredge-R630-Server-2x-E5-2620-V4-16-Cores-.jpg)
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
![Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330 picture](/store/img/g/ZD0AAOSwm41mOZYw/s-l225/Dell-PowerEdge-R630-Server-2x-E5-2640v3-2-60Ghz-16.jpg)
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
![Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD picture](/store/img/g/Fk4AAOSwDDplpAyL/s-l225/Dell-PowerEdge-R620-Server-2x-E5-2660-v2-2-2GHz-20.jpg)
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$139.99
![Dell 2950 (2950III) Server picture](/store/img/g/SikAAOSwPMZmhw4m/s-l225/Dell-2950-2950III-Server.jpg)
Dell 2950 (2950III) Server
$90.00
![Dell Poweredge R730xd 12 Bay LFF 2x SFF 2x E5-2680v3 2.5ghz H730p No Ram No HDD picture](/store/img/g/JzAAAOSwxLZmKS26/s-l225/Dell-Poweredge-R730xd-12-Bay-LFF-2x-SFF-2x-E5-2680.jpg)
Dell Poweredge R730xd 12 Bay LFF 2x SFF 2x E5-2680v3 2.5ghz H730p No Ram No HDD
$219.99
![Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD  picture](/store/img/g/yAwAAOSwdyNlgQ8d/s-l225/Dell-PowerEdge-R720xd-26HDD-300gb-2-5-inch-E5-2697.jpg)
Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD 
$180.00
![DELL PowerEdge R730 Server 2x E5-2680v3 2.5GHz =24 Cores 128GB H730 4xRJ45 picture](/store/img/g/O2MAAOSwRtNkh97Y/s-l225/DELL-PowerEdge-R730-Server-2x-E5-2680v3-2-5GHz-24-.jpg)
DELL PowerEdge R730 Server 2x E5-2680v3 2.5GHz =24 Cores 128GB H730 4xRJ45
$345.00
![DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45 picture](/store/img/g/1hMAAOSw8hVl8bKq/s-l225/DELL-PowerEdge-R430-8SFF-2x-E5-2680v4-2-4GHz-28-Co.jpg)
DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$226.00
![DELL PowerEdge R730XD Server 2x E5-2680v4 2.4GHz =28 Cores 64GB H730 4xRJ45 picture](/store/img/g/psQAAOSwaY9ki5PI/s-l225/DELL-PowerEdge-R730XD-Server-2x-E5-2680v4-2-4GHz-2.jpg)
DELL PowerEdge R730XD Server 2x E5-2680v4 2.4GHz =28 Cores 64GB H730 4xRJ45
$323.00