-
Junior Member
registered user
Knx. 3.2: partition renaming
Following the kind suggestions of messrs. Cormier & Rickenbacherus:
1.a: Type mount, enter. Report:
/dev/hda6 on / type ext3 (rw.errors=remount -ro)
/cev/root.old on /initrd type ext2 (rw)
none on /proc type proc (rw)
devpts on /dev/pts type devpts (rw.gid=5, mode=620)
usbdevfs on /proc/bus/usb type usbdevs (rw)
--------------------------------------------------------
normal?
----------
1.b: Type cfdisk/dev/hda, enter. Report:
My original partition schedule (as described above), appeared.
------------
2. I'm getting to this (slow learner). I understand you to mean that if I want the "mounts" to conform with my partition schedule, I must first edit etc/fstab, right? Is emacs my newbie weapon of choice here?
---------------
3. Did
cd/usr, enter, ls, enter. Report:
x1186 bin doc etc games include info lib local man sbin share src.
That tells me nothing about the partition, but tells me that directory /usr is not empty- right?
More later
Tia
chada
-
Senior Member
registered user
I think you may end up with problems if you move all of /usr to a separate partition, usually people just put /usr/local on a separate partition, and programs installed form source (compiled) will be there. I had a system with parts of /usr on a separate partition and I had some errors booting, and I had to manually run a program or 2 after the second partition was mounted.
I always put / and /home on separate partitions and generally use a /store partition for mp3's, iso's, etc.
rock
-
Senior Member
registered user
If you want all the partitions you made to show up in the mount command you have to edit the /etc/fstab and put entries in so that they will be mounted on boot. You could choose any editor you feel comfortable with it is just a matter of adding a couple of lines and saving the file so if you can do that with emacs then use it.
Yes the ls command showed the directory was not empty and everything was installed to hda6 and yes that tells you nothing about the partition only about the /usr directory on the / partition. If your /usr was on it's on partition then ls /usr would tell you what is in the directory and the partition because they are the same.
Rock is right you really do not need all those extra partitions (hda7-hda11) you should use cfdisk again and delete them and make either 1 or 2 partitions for your /home and maybe an extra for backups, mp3's etc...
My partitions are:
/swap
/
/home
/var/www - my web pages so I can share them among the three OS's I boot from.
/extra - mp3's, backups, iso, anything else also shared and on second hd.
-
Junior Member
registered user
Knx. 3.2: partition naming
Thank you, Stephen and Rock, for your advice. Simple is good. So following directions, I shall try to add a /home to the boot, root, and swap partitions already working....and report later.
chada
-
Junior Member
registered user
Knx. 3.2: partition naming
Now I have been back in cfdisk and reworked my partition schedule. Now, Win 2k is on hda1, and logicals hda5,6 & 8 are boot,root,& swap. And #7 is for home. Cfdisk refused to let me assign "extended" filesystem designation to #7. I druther ext3.
Now: following Stephen's answer to my question #4:
I booted the Kpx CD. The KDE desktop showed all my partitions except #8 (swap). Is that normal ?
In console, typed: "sudo mount /dev/hda7 /mnt/hda7
Reply: "mount: you must specify the filesystem type"
Good ! But...please...how do I tell it "ext3" ?
Tia,
Chada
-
Senior Member
registered user
Swap does not show up. sudo mount -t ext3 /dev/hda7 /mnt/hda7. Have you created the file system on #7 if not
sudo mkfs /dev/hda7 - creates file system ext2
sudo tunefs -j /dev/hda7 - converts file system to ext3.
then mount the partition.
-
Junior Member
registered user
Knx. 3.2: partition naming
Having read Stephen's (April 10- 8.50 PM) :
Still fearful of breaking something: to the question- have I created the filesystem on hda7 ? Cfdisk shows under FS Type for hda7: "Linux" . Therefore, the answer is yes, correct ?
Then next: type your line which starts "sudo tunefs.."
Right ?
Next: type line starting: "sudo mount -t ext3.."
Right ? Then I think I can follow remaining advice.
Tia
Chada
-
Senior Member
registered user
Yeah looks good to me, after you do the turnefs you can check again if you want and you will see linux ext3.
-
Junior Member
registered user
Knx. 3.2: partition naming
After Stephen's post: Apr.11/12:45AM:
My dummheit's keeping you awake. Sorry !
With Knx. CD booted, in console, typed: "sudo mount -t ext3 /dev/hda7 /mnt/hda7" Reply:
"mount: wrong fs type, bad option, bad superblock on /dev/hda7, or too many mounted file systems"
Then typed: "sudo mkfs /dev/hda7". Reply began: "mke2fs 1.32 (09-Nov-2002)", and then rolled out another 17 lines. Now I think for sure the filesystem is created on hda7.
Next, wishing to convert filesystemto ext3, typed: "sudo tunefs -j /dev/hda7". Reply:
"sudo: tunefs: command not found"
What next, o kind and patient one ?
Chada
-
Senior Member
registered user
it should be:
tune2fs -j device
rock
Similar Threads
-
By marshalx in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 12-09-2004, 09:38 AM
-
By Quite in forum General Support
Replies: 5
Last Post: 09-23-2004, 01:36 AM
-
By Quite in forum General Support
Replies: 12
Last Post: 08-22-2004, 10:40 PM
-
By rrfish72 in forum General Support
Replies: 12
Last Post: 08-05-2004, 07:09 AM
-
By rossnixon in forum General Support
Replies: 10
Last Post: 02-08-2004, 01:32 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![DELL Hard Drive SATA 6 Gbps 8TB 512e RPM 7.2K - MG05ACA800E picture](/store/img/g/YIAAAOSw~9lmfqsb/s-l225/DELL-Hard-Drive-SATA-6-Gbps-8TB-512e-RPM-7-2K-MG05.jpg)
DELL Hard Drive SATA 6 Gbps 8TB 512e RPM 7.2K - MG05ACA800E
$29.99
![Western Digital 4TB Internal 7.2KRPM 3.5](/store/img/g/QHQAAOSwCPxl~ZwC/s-l225/Western-Digital-4TB-Internal-7-2KRPM-3-5-WD4000FYY.jpg)
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99
![HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5](/store/img/g/TIMAAOSw969gDuvf/s-l225/HITACHI-HUS724040ALA640-4TB-7200RPM-64MB-SATA-6-0G.jpg)
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
![Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5](/store/img/g/tFMAAOSwjDVmceFV/s-l225/Seagate-ST1000VM002-1TB-64MB-SATA6Gb-s-3-5-Low-Pow.jpg)
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
![HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5](/store/img/g/buwAAOSwDghlwalj/s-l225/HGST-Ultrastar-DC-HC520-12TB-SATA-6Gb-256MB-3-5-En.jpg)
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
![CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD picture](/store/img/g/qqcAAOSw~xVgcyGX/s-l225/CISCO-A03-D1TBSATA-1TB-7-2K-6G-2-5INCH-SATA-HDD.jpg)
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
![Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5](/store/img/g/de0AAOSwcJJlDe~2/s-l225/Seagate-ST12000NM0127-12TB-SATA-6Gb-s-256MB-7200RP.jpg)
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
![WD Ultrastar DC HC530 14TB SATA 6G 3.5](/store/img/g/gggAAOSwwB5mL~fg/s-l225/WD-Ultrastar-DC-HC530-14TB-SATA-6G-3-5-7200RPM-Ent.jpg)
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
![Western Digital Gold Enterprise 4TB,7200 RPM Internal Hard Disk Drive WD4002FYYZ picture](/store/img/g/uDIAAOSwY95lQDIU/s-l225/Western-Digital-Gold-Enterprise-4TB-7200-RPM-Inter.jpg)
Western Digital Gold Enterprise 4TB,7200 RPM Internal Hard Disk Drive WD4002FYYZ
$39.95
![Fanxiang 4TB 2TB 1TB SSD 550MB/s 2.5'' SATA III Internal Solid State Drive lot picture](/store/img/g/pB0AAOSwrbRkIWhk/s-l225/Fanxiang-4TB-2TB-1TB-SSD-550MB-s-2-5-SATA-III-Inte.jpg)
Fanxiang 4TB 2TB 1TB SSD 550MB/s 2.5'' SATA III Internal Solid State Drive lot
$188.99