if anyone has a similar problem, here's what i did
ru (to get to the root)
then
mount -o remount,rw /mnt/sdc1
then it worked
=]
hello,
i'm completely new to knoppix but am using it to try to recover some files from a corrupt hard disk unto a usb memory stick.
the usb device appears on the desktop as "Hard Disk Partition [sdc1]" and it will not allow me to copy anything onto it. i get the error message "could not write to /mnt/sdc1/blah.doc"
any ideas on what might be going wrong here??
thanks in advance, alex
btw. i'm using the latest version of knoppix
if anyone has a similar problem, here's what i did
ru (to get to the root)
then
mount -o remount,rw /mnt/sdc1
then it worked
=]
Hi, I'm doing the same thing and trying to recover some files and put them on a memory stick or trying to burn it. I'm running a Dell laptop and it doesn't even have "Hard Disk Partition [cd1]" on the desktop for my USB drive. I have connected a cd burner, but when i wouldn't even let me access it. do you know how I can fix this?
what kind of interface to the burner? scsi, usb, firewire, paralell (printerport on a PC)?
the usb stick might be called ubX or sdX (where X is a number from 1-9 iirc) .
and you might mount it with comand below.
first we assume your drive is ubX
Code:mkdir /mnt/ubXnow we asume it is sdXCode:sudo mount -t vfat /dev/ubX /mnt/ubX -o rw
Code:mkdir /mnt/sdXthis should work in 90% of cases.Code:sudo mount -t vfat /dev/sdX /mnt/sdX -o rw
to find what your stick is called perhaps
might help orCode:dmesg|grep usbthese tewo comands will list a bunch of outputl look for lines like this (from my computer after i incert a usbstick)Code:fdisk -l
anddmesg|grep usb
...
usb 1-4.3: new full speed USB device using ehci_hcd and address 4
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
these two qoutes are somewhat shortened, you most likely get some more lines.fdisk -l
...
Disk /dev/sda: 65 MB, 65536000 bytes
50 heads, 32 sectors/track, 80 cylinders
Units = cylinders of 1600 * 512 = 819200 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 80 63984 6 FAT16
hope this helped you
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
$168.00
Supermicro 1U Server X9SRI-F Xeon E5-2640 v2 2.5Ghz 16-Cores / 64GB / No HDD
$149.99
HP Proliant MicroServer (Model: HSTNS-5151) NO HARD DRIVES-Power Tested,
$99.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant MicroServer Gen10 Plus - 16GB RAM No HDD
$500.00
SuperMicro SuperServer 5018A-FTN4 505-2 Intel Atom @ 2.4GHz 8GB w/ Ears
$174.99
Supermicro, 1U Server Intel, Unraid Server 2x 8CORE E5-2650V2 2.6GHz 32GB RAM
$350.00
HPE ProLiant v2 Ultra Micro Tower Server Pentium Gold G6405 16GB RAM P69102005
$696.73