Try running the newer kernel instead of the old 2.4
Simply type knoppix26(+enter ofcourse) as opposed to just hitting enter.
Hey!
Just trying out knoppix (very willing to change to it after running it in VMWare).
Well, to the problem.
1. Booted up the CD and hitted enter
2. That lovley pic of Tux came up and an marker started to blink
3. Total system hang
Prolly hardware compability errors.
My system are:
AMD Athlon 64 3500+
1024Mb EMY RAM PC3200 (2*512mb)
Asus A8N-E Deluxe w/ VIA K8T890 PCI-e north-bridge chipset
ATI Radeon X800 XL PCI-e
And I just downloaded Knoppix so its version 3.7
Hope you guys and gals have any nice and smooth answer
Try running the newer kernel instead of the old 2.4
Simply type knoppix26(+enter ofcourse) as opposed to just hitting enter.
Ok, Ill try that now. Thanks m8.
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge M620 Blade Server
$39.99
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
Dell Poweredge FC630 Blade Server BAREBONES No CPU, No HDD, No RAM
$75.00
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M620 Blade Server 2x E5-2670 2.6Ghz 16-Cores 256gb 2x 146gb 15k
$244.99
UCSB-B200-M4 UCS Blade Server, 2x E5-2667 V3, 256GB RAM DDR4, 2x 300GB Drives
$299.99