Hello.
I want to make a machine boot from a hard disk that already has a linux install on it. I basically need to reinstall lilo to the mbr, using the files from /mnt/hda1/boot (chain.b, boot.0300 & boot.b) and /mnt/hda2/etc/lilo.conf.
I am using the knoppix live CD, and if anyone can tell me how, please do so asap!!! I would be very grateful.
Here is my lilo.conf:
delay=40
append="panic=20"
boot=/dev/hda1
map=/boot/map
install=/boot/boot.b
#prompt
#timeout=50
message=/boot/message
linear
default=linux
image=/boot/vmlinuz-2.2.16-22smp
label=linux-mp
read-only
root=/dev/hda4
append="hdc=ide-scsi"
image=/boot/vmlinuz-2.2.16-22
label=linux
read-only
root=/dev/hda4
append="hdc=ide-scsi"
I copied 2 partitions off the drive as I through that the machine would no longer be needed as a RH7 server, and put FC2 on it.
I now find out that the machine is needed in bootable state (quickly!). I have copied the two images of the partition back on to the drive - hda1 which I have as /boot/ and hda2 which I have the rest of the old system on.
If someone can help me with this I would most grateful!
Thanks,
Tom Jermy
Cisco Nexus N9K-C92160YC-X 48P 25GbE SFP28 6P QSFP+/QSFP28 PE Switch
$475.00
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch + NM-8X Module
$549.97
Cisco Nexus 9300 48-Port 25GbE SFP 6x100GbE QSFP Switch P/N: N9K-C93180YC-EX
$499.99
Cisco WS-C3850-12X48U-L 48 Port 10/100/1000 Modular Uplink Switch-Same Day Shipp
$198.99
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$30.99
GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03
$6.80
New Sealed Cisco GLC-SX-MMD 1000BASE-SX Transceiver Module *US Shipping*
$11.00
Cisco GLC-LH-SMD Transceiver Module SFP 10-2625-01
$14.25
Cisco WS-C3750X-48PF-S 48 Port PoE Gigabit Switch w/ C3KX-NM-10G & Dual 1100WAC
$114.88
Cisco Nexus N9K-C9372TX 48P 10G Gigabit Ethernet 6x QSFP+ 40G Switch 2x650W PSU
$199.99