Hello.
I want to make a machine boot from a hard disk that already has a linux install on it. I basically need to reinstall lilo to the mbr, using the files from /mnt/hda1/boot (chain.b, boot.0300 & boot.b) and /mnt/hda2/etc/lilo.conf.
I am using the knoppix live CD, and if anyone can tell me how, please do so asap!!! I would be very grateful.
Here is my lilo.conf:
delay=40
append="panic=20"
boot=/dev/hda1
map=/boot/map
install=/boot/boot.b
#prompt
#timeout=50
message=/boot/message
linear
default=linux
image=/boot/vmlinuz-2.2.16-22smp
label=linux-mp
read-only
root=/dev/hda4
append="hdc=ide-scsi"
image=/boot/vmlinuz-2.2.16-22
label=linux
read-only
root=/dev/hda4
append="hdc=ide-scsi"
I copied 2 partitions off the drive as I through that the machine would no longer be needed as a RH7 server, and put FC2 on it.
I now find out that the machine is needed in bootable state (quickly!). I have copied the two images of the partition back on to the drive - hda1 which I have as /boot/ and hda2 which I have the rest of the old system on.
If someone can help me with this I would most grateful!
Thanks,
Tom Jermy
HP Z420 Workstation Xeon E5-1650 v2 3.5ghz 6-Cores 64gb 256gb SSD 2TB Win10
$149.99
HP Z440 WORKSTATION XEON E5-1603V3 @ 2.80GHz, 16GB RAM 250 GB SSD Win 11
$119.99
HP Z440 Workstation Desktop Xeon E5-1607 v4 3.10Ghz 32GB RAM 1TB HDD NO OS
$95.00
HP Z420 Workstation Xeon E5-2690 v2 3ghz 10-Cores 64gb 240gb SSD 1TB Win10
$109.99
Intel Xeon E5-2697 V4 2.30 GHz 18C 2011-3 2400MHz 45MB 145W SR2JV CPU Processor
$49.99
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 Grade A Processor
$5.29
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$39.99
Intel Xeon Gold 6138 2.0GHz 27.5MB 20-Core 125W LGA3647 SR3B5
$52.00
Dell Precision 5810 Workstation Xeon E5-1650 6C 3.5GHz 16GB 500GB Win10 K2200
$124.67
HP Z820 Workstation 20-Core 2.50GHz E5-2670 v2 128GB No HDD No OS
$284.89