My wireless lan card Intel PRO/Wireless 2100 3B is working perfectly with the ipw2100 driver which comes with knoppix 3.7. I successfully set the driver to monitor mode. Although the Kismet release installed on knoppix 3.7 is not the latest, it should support my card. That's what the README says.
To be able to change the kismet config, I copied the conf-files to my persistant home directory and changed whatever was needed. There is one thing which I couldn't figure out in kismet.conf:
I have to tell the server the source, where to get the packages.
example: source=cardtype,interface,name[,initialchannel]
when setting it to: source=ipw2100,eth0,somename,somechannel
it says: Unknown capture source type 'ipw2100' in source 'ipw2100,eth0,somename,somechannel'
Seems I am to stupid to understand the comments in the file. If you wanna take a look at it: /etc/kismet/kismet.conf.
Can anybody help me out?
================================================== ==========
Did find out what the problem is:
The version of Kismet included with Knoppix 3.7 does not support my card-driver. It is too old.
Am I right, that the installation of a newer version of Kismet would require remastering the Knoppix-CD?
DELL PowerEdge R630 8SFF Server 2x E5-2680v4 2.4GHz =28 Cores 128GB H730 4xRJ45
$346.00
DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$296.00
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$256.99
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$509.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
HP ProLiant DL360 G9 Server 2x E5-2690v3 2.60Ghz 24-Core 256GB P440ar
$302.90
Dell PowerEdge T620 8-Bay LFF Xeon E5-2660 0 2.20GHz 48GB NO HDD S110 Server
$174.99
Dell Poweredge R730xd 3.5 2x E5-2666 v3 2.9ghz 128gb H730 14x Trays 2x 1100w
$519.99
DELL PowerEdge R730 Server 2x E5-2680v3 2.5GHz =24 Cores 32GB H730 4xRJ45
$249.00
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB
$334.99