The obvious solution would be to boot from the live CD (not from your hard drive), run QTParted as root, and recreate the swap partition, no?Originally Posted by jariep
I accidentally deleted my swap partition with qtparted. How do I create a new swap partition for knoppix 3.6 to replace the one I deleted?
The obvious solution would be to boot from the live CD (not from your hard drive), run QTParted as root, and recreate the swap partition, no?Originally Posted by jariep
This is exactly the sort of situation that knoppix live-CD shines at: emergency system recovery, even for itself.Originally Posted by eco2geek
Creating the swap partition is only the first step however. It also has to be initialised. QTParted apparently will do this. Select the appropriate partition, then go under Operations->&Format. Select a partition type of "linux-swap". Or, you can do it from a root shell using mkswap (see the man page). The next time you boot linux should find the swap and use it automagically just like always.
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Western Digital Gold Enterprise 4TB,7200 RPM Internal Hard Disk Drive WD4002FYYZ
$39.95
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
Hitachi 4TB 3.5" Hard Drive HUS724040ALE640 Ultrastar 7K4000 Internal 7.2K
$49.95
Western Digital 8TB Certified Refurbished My Book Hard Drive-RWDBBGB0080HBK-NESN
$124.99