Did you try knoppix screen=800x600 vsync=60 or something like that?
After using
knoppix noscsi
it loads fine with the exception of some I/O errors but then when it goes to booting into winx11 or wtvr i get this fuzzy screen, like a messed up tv or sumthin...any ideas? its a kds 15in crt that works fine and i have no clue what the graphics card is other than it is O L D.
Did you try knoppix screen=800x600 vsync=60 or something like that?
yes, i actually tried exactly that and it yielded the same "fuzzy screen"
i just gave slax a try and it did the same thing...booted fine but when it tries to launch the gui i get a fuzzy screen
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
WD Ultrastar DC HC520 12TB SATA III 3.5" Enterprise HDD (HUH721212ALE600)
$100.00
Hitachi 4TB 3.5" Hard Drive HUS724040ALE640 Ultrastar 7K4000 Internal 7.2K
$49.95