After much digging around I beleave cloop is read only.
Can't find anything about multi. cloops, probably no also.
No reply at the Debian site yet.
I'm guessing the kernel support for cloop is read only, WHY NOT READ/WRITE?
Is the knoppix cloop file read-only because it's on a CD, or by design?
Can a kernel with cloop support mount more than 1 cloop file?
The usefullness of cloop would be MUCH greater in both regards.
Can anyone tell us, can cloop be directly written to & can there be more than 1?
I'm going to put this on the Debian web site, if I get a reply I'll post it back here.
After much digging around I beleave cloop is read only.
Can't find anything about multi. cloops, probably no also.
No reply at the Debian site yet.
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
Sans Digital 2 Bay SATA to eSATA/ USB 2.0 RAID JBOD
$79.35
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
ASUS Hyper M.2 x16 Gen 4 RAID Card- Used Working
$32.95
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$17.99
Dell H310 SATA SAS RAID Controller Card - HV52W with 1 SFF-8087 Cable, IT Mode
$20.00
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
LSI 8 Port 6Gbps PCIe 3.0 External SAS RAID Card w/ 1GB CacheVault & Low Profile
$24.65
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$131.59
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 For 2.5" SATA HDD SSD UASP
$56.25