-
Junior Member
registered user
Trouble doing poor man's for 3.7
I have never had a problem installing/poor man's install before. Wife wanted to 'save to cd' and did her stuff and then have a poor man's install done with 3.7. Been doing that since 3.3 first arrived.
We wiped/reformated the hd as she didn't like the 'extra' partitions it had, so we have just the primary and one logical with a swap betwix them. ext2 and blank otherwise.
I used a disk 1 from mandy 9.1 and also redid it with fdisk. It still will not go to the hd and do the 'copying cdrom' thingy. I had 3.6 on there, and it will not.
The command I used is:
boot: knoppix26 tohd /dev/hde1
also tried /mnt/hde1
That machine see's the first primary as hde1 not hda1..apparently the manufacturer has a 'second' disk controller on it as this machine, which needed more hd had to have one installed in a pci slot and also doesn't have any hda's, just hde's.
I even ;saved config' and make a home etc and it still will not copy either 3.6 or 3.7 as a 'poor man's' install..just runs off the cd only.
Help! What am I missing / messed up!
2. Does it have to have something installed on the hd to work? It is just formatted ext2 only on both hde1 and hde6 with hde5 being swap...no installed os at all. I could put SimplyMepis on it as a os if need be.
Don't tell her to:
boot; knoppix hdinstall
Silly woman!!
Sorry for the long post, but I tried 'tohd' for about 3 hours and nothing worked!!
-
I am having the exact problem. I've tried to install it on 3 different HD's and still no luck. I keep getting this error; "Copying knoppix CDROM failed. /dev/hda1 is not mountable." then it boots from the CD. I've tried using hdc1 and hdd1 and nothing.
-
I changed the configuaration of my computer a couple of weeks ago and also ended with a harddisk recognized as hde.
Very likely that first disk controller is available. Just move the cable of the harddisk to the other connector and try again.
If the harddisk is recognized as hdb, then just use the other connector on the harddisk cable.
Good luck.
Stefan
-
i got it to work. i had to go into the terminal and type some things in.
Similar Threads
-
By anksingh in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 08-01-2006, 04:56 AM
-
By pau1knopp in forum General Support
Replies: 0
Last Post: 01-08-2006, 03:13 PM
-
By xfiles in forum Knoppix DVD
Replies: 1
Last Post: 09-02-2005, 06:20 AM
-
By bigkahuna in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 01-13-2005, 08:22 PM
-
By Obsidian in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 08-28-2003, 06:34 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Grandstream GS-HT802 2 Port Analog Telephone Adapter VoIP Phone & Device, Black
$32.00
Cisco VG202XM Analog Voice Gateway VoIP -- [NEW/FULL KIT]
$76.00
Yealink T54W IP Phone, 16 VoIP Accounts. 4.3-Inch Color Display - Black
$99.99
LOT OF 10 Cisco CP-7841-K9 VoIP 4-Line Business Phone w/ Stand Handset Cord
$69.99
Yealink W73H IP DECT VOIP Phone
$10.00
New Cisco 7945G IP VoIP Gigabit GIGE Telephone Phone CP-7945G -
$24.95
Cisco CP-7945G VOIP Phone With Stand & Handset Business IP Phone 7945
$3.00
Polycom VVX 401 Corded 12 Line PoE IP Phone VOIP (2200-48400-025)
$34.99
Yealink SIP-T41P PoE Ultra Elegant VoIP Phone
$29.95
NEW Open Box Polycom CCX 400 VoIP Desk Phone PoE 2200-49700-001 (BR)
$107.96