after some other problems i had, i recompiled a kernel (standard kernel-source-2.4.20 from debian) using the .config in /usr/src/linux/. i compiled ext3 into the kernel (not a module). that seems to have fixed it.
hi! i've installed knoppix 3.2 and everything works fine... <suspense>... except... i get the following warning in syslog (dmesg):
when i installed knoppix i specified the root partition (/dev/hda5) to use ext3 as filesystem and then afterward added and mounted my existing '/home/' partition (/dev/hda6) as ext3. firstly, here are the relevant parts of my /etc/fstab:Code:EXT2-fs warning (device ide0(3,5)): ext2_read_super: mounting ext3 filesystem as ext2
the output from 'mount':Code:... /dev/hda5 / ext3 defaults,errors=remount-ro 0 1 /dev/hda6 /home ext3 defaults 0 1 ...
BUT! look at this... the output of 'cat /proc/mounts':Code:# mount /dev/hda5 on / type ext3 (rw,errors=remount-ro) none on /proc type proc (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) /dev/hda6 on /home type ext3 (rw)
it looks like there seems to be only one instance of kjournald running (for my /home/ partition i assume)Code:# cat /proc/mounts rootfs / rootfs rw 0 0 /dev/root / ext2 rw 0 0 none /proc proc rw 0 0 devpts /dev/pts devpts rw 0 0 /dev/hda6 /home ext3 rw 0 0
when i have the occasional crash, fsck is run on /dev/hda5, but never on /dev/hda6. yet both are supposed to be journaling. i have had corruption on my root partition as a result.Code:# ps aux| grep kjournald root 137 0.0 0.0 0 0 ? SW 18:27 0:00 [kjournald] root 1670 0.0 0.0 1288 424 pts/0 R 21:29 0:00 grep kjournald
i've done some searching on google and groups.google (see second item below 'old stuff' http://groups.google.co.nz/groups?hl...1%40zip.com.au) and it seems that the problem is that the kernel is loaded, but it can't access the root partition using ext3, because it doesn't have ext3 support compiled in - as ext3 is compiled as a module. so instead it mounts it as ext2. so i could presumably compile a kernel with ext3 built in and run lilo. call me picky, but i really think that if knoppix allows you to format a root partition as ext3, it should mount it as ext3 in the future...
the other alternative is something to do with the way initrd works, but i'm completely lost when it comes to that.
what should i do?
sorry for the long post. i wanted to make sure i supplied all the info i could.
cheers
julian
after some other problems i had, i recompiled a kernel (standard kernel-source-2.4.20 from debian) using the .config in /usr/src/linux/. i compiled ext3 into the kernel (not a module). that seems to have fixed it.
knx-hdinstall should ahve created an good initrd that should ahve soled this problem ...Originally Posted by gwylion
Hm...
Could you say exactly which version you did use ?
And that you did change nothing on system after installation ?
cu
Fabian
i used KNOPPIX_V3.2 -2003-03-28-EN.iso which admittedly is not the latest and greatest, so it might have been fixed since then. however, since i haven't tried the latest version yet, for all i know it may still have the same issue. it's a bit subtle and i don't know how many people would have picked it up... if it wasn't for my dodgy hardware causing the occasional crash, i probably would never have noticed.
and no, i did not change the system at all after installation.
Cisco Systems NCS2K-20-SMRFS-L optical multiplexor CISCO EXCESS
$3599.00
Cisco RV320 Dual WAN VPN 4 Port Gigabit Router w/ Web Filtering RV320-WB-K9-NA
$374.00
Cisco 1100 Terminal - gateway - rack-mountable C1100TGX-1N24P32A
$1349.00
Cisco RV340W 1000Mbps Dual WAN Gigabit VPN Wireless AC Router RV340W-A-K9-NA
$183.00
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod
$83.00
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$38.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
Cisco Catalyst WS-C2960-48TT-L V02 48 Port Fast Ethernet Switch
$34.00
New Cisco C9200-NM-4X Catalyst 9200 Series Network Module 4 X 10GE *MINT*
$429.97
Cisco C9300-48 48 Port Switch Dual PSU W/C9300-NM-8X P/N: C9300-48U-A Tested
$799.99