-
Renaming Hard Drives/Partitions
Fast question
How do you rename the hard drive partitions? I've tried using F2 or selecting "Rename", but when I do, I wind up with the entire partition being copied to another area on the hard drive.
All I want to do is "name" my partitions something like:
"Knoppix 3.7", or "Windows 98 SE", or "Exchange", or "Mepis", or "Archives" - well you get the picture. I'm not interested in making extra copies of the existing partition! If I wanted that, I'd use "partimage".
Anyone help?
GMD
-
Senior Member
registered user
Hard drives are like cats. It doesn't matter what you name them - they don't listen anyway!
Where do you want the names to show up? The partitions themselves don't store names.
-- Ed
-
Senior Member
registered user
If you're thinking that you can give paritions labels, the way you do in Windows (i.e. select the "C:\" drive in Explorer, press F2, and give it a name), well, partitions can have labels in Linux, but they're hardly ever seen. For example, I labeled my "home" partition (hdb1) "home", just for the heck of it, when I created the partition, but the label's never used.
(You can use the "e2label" utility to label Linux partitions.)
In Linux, you usually create a directory and mount the partition to the directory (even the root partition, which has to be mounted on the "/" directory, if you will). You can name the directory whatever you want, although spaces are a bad idea, since it causes extra work when using the command line (you have to use escape characters or surround the whole thing with quotes).
For example, say I had a Windows partition (hda1) that I wanted to mount at /media/Win_C. I'd have to create the directories if they didn't already exist, and then mount the partition with the command
mount /dev/hda1 /media/Win_C -t ntfs -o ro
The name of the directory doesn't matter, nor does it have anything to do with the label of the partition. I could just as easily create a directory named /mnt/Bill-Gates-Sucks and mount the same partition there:
mount /dev/hda1 /mnt/Bill-Gates-Sucks -t ntfs -o ro
And, to make Linux mount the partition every time you boot into Linux, you have to make an entry into /etc/fstab ("fstab" = file system table).
-
Senior Member
registered user
What he said. I was thinking of partition tables, which don't hold labels. That's why they don't show up with fdisk or parted.
But the label you create or show with e2label can be used in the first column of /etc/fstab, for example. And it will even show up when you're in Windows if you run Partition Magic. (And a label you apply in Partition Magic will show up in Linux when you run e2label, too.)
-- Ed
-
Thanks All
Where I want the labels to show up are in KDE, and Konqueror or FireFox when I'm "browsing" my computer. Right now all they show up as is like
Hard Disc (hdb5) [/mnt/hdb5]
wich does not remind me of what I put there. When you have two, 120G hard drives partitioned into 10G and 40G partitions, it can get a bit confusing on where things are!
So you say I can go into fstab and name all the points that my partitions are to be loaded to? I'll have to try that this weekend!
Thanks again
Have a good weekend!
GMD :P
-
Originally Posted by
mr_ed
What he said.
I was thinking of partition tables, which don't hold labels. That's why they don't show up with fdisk or parted.
But the label you create or show with e2label can be used in the first column of /etc/fstab, for example. And it will even show up when you're in Windows if you run Partition Magic. (And a label you apply in Partition Magic will show up in Linux when you run e2label, too.)
-- Ed
OK - I've tried puting partition labels everywhere. None of them show!
Can you show me a line from your fstab with a working LABEL?
Thanks
-
So why not just rename the mountpoint? For example the partition I backup to is called /mnt/images instead of /mnt/hda7 and the line in fstab is:
/dev/hda7 /mnt/images ext3 defaults,rw,noauto,users 0 2
-
Originally Posted by
Markus
So why not just rename the mountpoint? For example the partition I backup to is called /mnt/images instead of /mnt/hda7 and the line in fstab is:
/dev/hda7 /mnt/images ext3 defaults,rw,noauto,users 0 2
rriigghhtt!!
I go into fstab and change the mount point names li you show.
/dev/hda1 /mnt/Windows_98 vfat noauto,users,exec,umask=000 0 0
/dev/hdb2 /mnt/Mepis reiserfs noauto,users,exec 0 0
etc
Now I return to KDE and try to "mount" one of these drives and I get an error
Could not mount device.
The reported error was:
mount: can't find /mnt/hdb2 in /etc/fstab or /etc/mtab
So I think - ok - need to reboot to make things happen. Right? WRONG!
I reboot and my changes in fstab have all been reset to
# Added by KNOPPIX
/dev/hda3 /mnt/hda3 ext3 noauto,users,exec 0 0
# Added by KNOPPIX
/dev/hda5 /mnt/hda5 vfat noauto,users,exec,umask=000 0 0
# Added by KNOPPIX
/dev/hda6 /mnt/hda6 vfat noauto,users,exec,umask=000 0 0
# Added by KNOPPIX
/dev/hda7 none swap defaults 0 0
# Added by KNOPPIX
/dev/hdb1 /mnt/hdb1 vfat noauto,users,exec,umask=000 0 0
# Added by KNOPPIX
This is no longer fun! It has tipped into the "frustrated" side!
Where do I go from here?
Thanks
GMD
-
With renaming the mountpoint I actually meant: "mv /mnt/hdb2 /mnt/Mepis" as the mountpoint to where you mount the partition is under /mnt. Well, some mountpoints are under / like cdroms.
After you rename the dir (mountpoint) under /mnt you just need to change the correspondent line in fstab to the new name.
BTW, what kind of hdinstall do you have when fstab gets changed between reboots? If knoppix or beginner style add "nofstab" to the append line for kernels in /etc/lilo.conf , save the file and run "lilo -v" for the changes to take effect.
-
Originally Posted by
Markus
[snip]BTW, what kind of hdinstall do you have when fstab gets changed between reboots? If knoppix or beginner style add "nofstab" to the append line for kernels in /etc/lilo.conf , save the file and run "lilo -v" for the changes to take effect.
I did a beginners install to take advantage of the automatic detection. but I got away from LILO ASAP and am happly running GRUB. I assume I can change the line in GRUB with a entry? This way when I modify fstab and restart knoppix, I won't loose all my hard work?
So I modify my grub menu list to something like this?
title Knoppix 3.7 at hda2, kernel 2.6.7
#root (hd0,1)
kernel (hd0,1)/boot/vmlinuz-2.6.7 root=/dev/hda2 nomce quiet vga=791 ro ramdisk_size=100000 init=/etc/init lang=us apm=power-off splash lang=us fb1024x768
nofstab
initrd (hd0,1)/boot/initrd.img-2.6.7
savedefault
#boot
?
Looks good anyway...
Thanks
GMD
Similar Threads
-
By algebraic in forum MS Windows & New to Linux
Replies: 5
Last Post: 09-11-2005, 11:50 AM
-
By bdn103 in forum Customising & Remastering
Replies: 0
Last Post: 09-03-2005, 04:35 PM
-
By randolphtaco in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 06-20-2005, 08:23 PM
-
By passion_wheel1974 in forum Hardware & Booting
Replies: 0
Last Post: 04-18-2005, 11:06 PM
-
By phsieh in forum General Support
Replies: 2
Last Post: 12-14-2004, 06:23 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Supermicro 4U 4x Nvidia GPU AI Server 3.8Ghz 8-Core 256GB 2x10G SFP+ 2x2200W
$3472.00
Supermicro 4U 4x Nvidia GPU AI Server 3.8Ghz 8-Core 64GB 2x10G SFP+ 2x2200W
$3180.00
Intel - Core i9-13900K 13th Gen 24 cores 8 P-cores + 16 E-cores 36M Cache, 3 ...
$689.99
Intel - Core i7-13700K 13th Gen 16 cores 8 P-cores + 8 E-cores 30M Cache, 3.4...
$489.99
AMD Ryzen 9 5950X 16-core 32-thread Desktop Processor
$319.99
Apple Mac Pro Processor Tray 5,1 2010 2012 2.4ghz 8 core
$79.99
Intel - Core i7-12700K Desktop Processor 12 (8P+4E) Cores up to 5.0 GHz Unloc...
$419.99
Intel - Core i9-12900K Desktop Processor 16 (8P+8E) Cores up to 5.2 GHz Unloc...
$619.99
HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram Dual 256GB SSD K420 Linux GA
$234.98
Dell Precision 3630 8-Core i9-9900K 3.6GHz 32GB 512GB SSD WIN 11P
$479.99