I am hoping to use Knoppix both as a live system on cd and as a normal sytem installed to hard disk on various machines.
On my laptop using the CD I am trying to set up wireless networking using a 3com 3crwe154g72 card. However this card is given the designation eth1, when you try to set up the config (using wavlan) you are only offered choices for eth0, this is the default motherboard lan port. This seems daft, or is it me who's daft. Can anyone shed any light on this enigma and for that matter is anyone using this type of card.
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Dell PowerEdge M620 Blade Server
$39.99
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
HP ProLiant BL460C G7 Blade Server 2x Intel Xeon 3.06Ghz X5667 QLogic QMH2462
$28.95
Dell PowerEdge M620 Blade Server 2x E5-2670 2.6Ghz 16-Cores 256gb 2x 146gb 15k
$244.99
Dell Poweredge M630 Blade Server 2x E5-2680 v3 2.5ghz 24-Cores / 256gb / H730
$399.99