1. you edit lilo.conf as root, from terminal or graficaly, from Konqueror (my prefer way)
2. you must save what you did
3. now, you must perform command LILO from terminal, you will see masage if all is good.
After that, your new lilo will work.
The best way to answer my many questions is by asking "Is it possible to boot the Knoppix 3.8.1 LiveCD and perform a Linux install such that a reboot is not required?" This can be refined by adding "After a 'knoppix-installer' session of installing to /dev/hda1, can I transfer control to the computer (/dev/hda1) so that everything will run from the Hard Disk and not the CD?" The CD is the speed bottleneck of a LiveCD system.
After installing Knoppix 3.8.1 via the 'knoppix-installer' script, I needed to modify /etc/lilo.conf to add "acpi=off" to the boot string.
Not knowing how to edit hda1:/etc/lilo.conf, I simply rebooted. As is noted elsewhere on this forum, my PS2 mouse was not installed since "acpi=off" had not been added to the lilo.conf boot string. The Knoppix CD creates a virtual filesystem. Where is the partition (hda1) to which it installed the new system?
How can I edit the file hda1:/etc/lilo.conf and not a virtual copy? I need to edit the actual file on hda1 so that when I reboot, 'acpi=off' is read from the new file at hda1:/etc/lilo.conf.
Thanks, Bob
1. you edit lilo.conf as root, from terminal or graficaly, from Konqueror (my prefer way)
2. you must save what you did
3. now, you must perform command LILO from terminal, you will see masage if all is good.
After that, your new lilo will work.
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
$209.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
HP ProLiant DL360 G9 2x Xeon E5-2690 V3 24 Cores 2.6GHz P440ar 32GB DDR4
$119.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00